Tascam UH-7000
Xαζεύοντας στο hype-fi (head-fi) έπεσε το μάτι μου στο παρακάτω
The UH-7000 is a pro-level microphone preamp and audio interface designed with a strong focus on low noise and high audio quality. Not only can this unit be used as a 4-in/4-out audio interface in a DAW production environment, but as a standalone microphone preamp and A/D / D/A converter. The built-in HDIA (High Definition Instrumentation Architecture) microphone preamps are newly designed and perform at ?128 dBu equivalent input noise, a signal-to-noise ratio of 117 dB and distortion of 0.0009 % or less.
The grand nature of the UH-7000’s sound is partially due to the careful attention spent on selecting parts. In addition to Burr-Brown converters and metal thin-film resistors, installed is a powerful TCXO clock generator with a precision of ±1 ppm.
The unit’s half-rack size makes it easy to install at a studio console or work desk. The thick aluminum panels used on the front and sides of the full-metal body help increase stability. Highly important but easily forgotten about are the smooth-tension aluminum input level knobs for precise level adjustments.
The UH-7000 microphone preamp and audio interface enables composers, musicians and recording engineers to produce music in their private quarters at a level generally reached only in professional studios.
- Supports 24-bit/192kHz USB transmission and AD/DA conversion
- Support for Mac and Windows operating systems
- 4-in/4-out audio streaming from a PC connected via USB 2.0
- Burr-Brown PCM4220 AD converter
- Burr-Brown PCM1795 DA converter
- HDIA mic preamps: -128dB EIN
- Thin film metal resistors with outstanding noise performance
- High audio quality film capacitors with low distortion
- Low latency monitoring through the DSP mixer
- DSP mixer can be switched between multitrack and stereo mix modes
- DSP mixer enables independent adjustment of recording and monitoring levels
- Line or digital outputs can be selected using the DSP mixer
- DSP dynamics effect can be applied to inputs, outputs or the master (compressor, noise suppressor, de-essoer, exciter, EQ, limiter/low cut)
- DSP REVERB (hall, room, live, studio, plate) send effect is perfect for monitoring when recording
- Link line function enables volume control of powered monitors
- Single punch MIXER PANEL button
- Strong, highly durable aluminum body
- Large INPUT level knobs enable precise adjustment of input levels
- Two 20-segment LED level meters
- Standard TRS headphones output jack - 45mW/channel output
- +48 Phantom power supply
- Two balanced analog XLR jacks for both input and output
- Professional output specifications (maximum output level: +24 dBu)
- Two balanced analog TRS input jacks
- XLR digital input and output jacks support AES3-2003/IEC60958-4 (AES/EBU) and IEC60958-3 (S/PDIF) formats
- Three-pronged inlet power cable
- Half-rack size
- Confirmed operation with major DAW software, including Sonar X3, ProTools, Cubase and Live
- RoHS Compliant
Πρόκειται για audio interface που μπορεί να λειτουργήσει σαν DAC (Bur-Brown PCM1795)(24bit-192 Khz) , ADC (Bur-Brown PCM4220) , προενισχυτής μικροφώνων(νομίζω λειτουργεί και standalone), προενισχυτής ενεργών ηχείων ενώ διαθέτει (κατά τα λεγόμενα) ένα ικανό ενισχυτή ακουστικών.
Δεν ξέρω πως παίζει και πως ηχογραφεί αλλά για το τι προσφέρει για 450 ευρώ φαίνεται τούμπανο.
Μιχάλη το χεις δει?
