Firmware του Pioneer DV-610AV στο Pioneer DV-600AV για να παίζει SACD-R

  • Αγαπητοί φίλοι και φίλες.

    Με ιδιαίτερη χαρά σας προσκαλούμε στην κοπή της πρωτοχρονιάτικης πίτας του AVClub στη Θεσσαλονίκη για το 2024 την Κυριακή 07 Απριλίου και ώρα 14.00

    Δηλώστε τη συμμετοχή σας εδώ, θα χαρούμε πολύ να σας γνωρίσουμε από κοντά.

Messenger

AVClub Addicted Member
31 January 2008
2,652
Αθήνα
Έχω το 600AV και σκέφτομαι να του βάλω ένα πειραγμένο firmware για το 610 για να παίζει SACD-R που έχω πολλά.

Με το μαμά firmware και τα δύο παίζουν SACD αλλά όχι SACD-R.

Εδώ λένε ότι και τα δύο παιζουν SACD-R με πειραγμένο firmware αλλά firmware για SACD-R βρήκα μόνο για το 610 εδώ.

Εδώ λένε ότι πρακτικά δεν υπάρχουν διαφορές, έχουν ίδια PCB, chipset και DAC.

Να το τολμήσω ή θα γίνει τούβλο; (Έχω και το Pioneer DV-575A που έβαλα πειραγμένο firmware και παίζει μια χαρα τα SACD-R).
 

Messenger

AVClub Addicted Member
31 January 2008
2,652
Αθήνα
Τελικά το τόλμησα και πέτυχε. Σημειωτέον ότι όχι μόνο παίζει τα SACD-R αλλά είναι και πολύ καλύτερο με άμεση ανταπόκριση και όλες τις λειτουργίες του αρχικού και βάλε, σε αντίθεση με αυτό που είχα βάλει από το site του Σουηδού που παρουσίαζε αρκετές δυσλειτουργίες και άλλα περίεργα.

Λοιπόν:

Κατεβαζεις το αρχείο "SACD-R" από εδώ (απλά κάνεις κλίκ πάνω στο αρχείο)

Αποσυμπιέζεις το αρχείο. Στο φάκελο "Pioneer\DV-610AV" υπάρχει το αρχείο YJC8919A.BIN που περιέχει το σωστό firmware για το Pioneer DV-610AV που κάνει μια χαρά και για το Pioneer DV-600AV

To καις σε ένα δισκάκι CD (κάνουν και τα επανεγγράψιμα, αλλά να είναι καθαρό χωρίς γρατζουνιες κλπ για να μη γίνει κανένα ατύχημα στην ανανέωση του player) ως εξής:
====================
1. Launch Nero.
2. In the "New Compilation" panel:
- top left part, choose "CD" in the drop-down list
- bottom left part, choose "CD-ROM (ISO)" in the icon list
In tabs, choose following options:
"Multisession" tab
- "No Multisession" must be selected
"ISO" tab
- File name length: "Max of 11 = 8 +3 chars (ISO level 1)"
- Format: "Mode 1"
- Character set: "ISO 9660"
- "Joliet": this option should be unchecked
"Label" tab
- Volume label - ISO 9660: "PIONEER" (without quotes)
"Burn" tab
- "Write" must be checked
- "Finalize CD" MUST BE checked!!
- Write Speed: "please do not select the maximum speed but rather an other less fast if possible"!
- Write Method: "Disk-at-once"
3. Click on button "New".
4. In the right window, choose the file corresponding to firmware YJC8919A.BIN and drag&drop it in the window most to the left.
5. Choose the menu "Recorder\Burn Compilation..."
6. Launch burning using the "Burn" button.
7. When the burning is launched, please check the box "Verify written data", to be sure of the date written during this session.
==============

Μετά περνάς το firmware στο DV-600AV ως εξής:
==============
UPGRADING:
1. Turn on the player, and open the disc tray.
2. Put the Firmware Update Disc on the tray, and close the tray.
3. A screen will be displayed inviting you to push the "play" button to start the update.
4. The player will load the data, and the tray will open again. Remove the Firmware Update Disc from the tray now. Leave the tray open. The update process will complete in few minutes.
5. Wait until the update process finishes and the DVD logo is shown on the screen.

Attention: DO NOT unplug the power cable or turn off the player during the update process.
============

Και είσαι άρχοντας...