AVClub.
  • Login:
1 2 2
  1. #1
    AVClub Addicted Member
    Jan 2008
    2,456

    Firmware Pioneer DV-610AV Pioneer DV-600AV SACD-R

    600AV firmware 610 SACD-R .

    firmware SACD SACD-R.

    SACD-R firmware firmware SACD-R 610 .

    , PCB, chipset DAC.

    ; ( Pioneer DV-575A firmware SACD-R).
    ( ).
    . .

  2. #2
    AVClub Addicted Member
    Jan 2008
    2,456

    : Firmware Pioneer DV-610AV Pioneer DV-600AV SACD-R

    . SACD-R , site .

    :

    "SACD-R" ( )

    . "Pioneer\DV-610AV" YJC8919A.BIN firmware Pioneer DV-610AV Pioneer DV-600AV

    To CD ( , player) :
    ====================
    1. Launch Nero.
    2. In the "New Compilation" panel:
    - top left part, choose "CD" in the drop-down list
    - bottom left part, choose "CD-ROM (ISO)" in the icon list
    In tabs, choose following options:
    "Multisession" tab
    - "No Multisession" must be selected
    "ISO" tab
    - File name length: "Max of 11 = 8 +3 chars (ISO level 1)"
    - Format: "Mode 1"
    - Character set: "ISO 9660"
    - "Joliet": this option should be unchecked
    "Label" tab
    - Volume label - ISO 9660: "PIONEER" (without quotes)
    "Burn" tab
    - "Write" must be checked
    - "Finalize CD" MUST BE checked!!
    - Write Speed: "please do not select the maximum speed but rather an other less fast if possible"!
    - Write Method: "Disk-at-once"
    3. Click on button "New".
    4. In the right window, choose the file corresponding to firmware YJC8919A.BIN and drag&drop it in the window most to the left.
    5. Choose the menu "Recorder\Burn Compilation..."
    6. Launch burning using the "Burn" button.
    7. When the burning is launched, please check the box "Verify written data", to be sure of the date written during this session.
    ==============

    firmware DV-600AV :
    ==============
    UPGRADING:
    1. Turn on the player, and open the disc tray.
    2. Put the Firmware Update Disc on the tray, and close the tray.
    3. A screen will be displayed inviting you to push the "play" button to start the update.
    4. The player will load the data, and the tray will open again. Remove the Firmware Update Disc from the tray now. Leave the tray open. The update process will complete in few minutes.
    5. Wait until the update process finishes and the DVD logo is shown on the screen.

    Attention: DO NOT unplug the power cable or turn off the player during the update process.
    ============

    ...
    ( ).
    . .

 

 

Users Browsing this Thread

1 . (0 1 )

Bookmarks

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •