Κωδικοί Service Menu...

  • Αγαπητοί φίλοι και φίλες.

    Με ιδιαίτερη χαρά σας προσκαλούμε στην κοπή της πρωτοχρονιάτικης πίτας του AVClub στη Θεσσαλονίκη για το 2024 την Κυριακή 07 Απριλίου και ώρα 14.00

    Δηλώστε τη συμμετοχή σας εδώ, θα χαρούμε πολύ να σας γνωρίσουμε από κοντά.

Status
Not open for further replies.

panosxgr

Supreme Member
24 June 2006
8,604
Στο παρόν θέμα μπορείτε να βρείτε για όλες τις γνωστές μάρκες τους κωδικούς με τους οποίους κάποιος μπορεί να μπει στο λεγόμενο "service menu" των τηλεοράσεων.

Το θέμα θα παραμένει κλειδωμένο και θα ενημερώνεται όποτε έχουμε νεότερους κωδικούς σε κάποια μοντέλα. Ετσι πιστεύουμε ότι θα μπορείτε ευκολότερα και γρηγορότερα να βρίσκετε αυτό που ζητάτε. :eek:perator:

Επίσης να σημειώσουμε ότι σε κάθε ΜΑΡΚΑ παραθέτουμε ίσως πάνω από έναν συνδυασμό/κωδικό. Εαν δεν μπορείτε να μπείτε με τον 1ο στο service menu, δοκιμάστε και τους υπόλοιπους.

Εαν κάποιος από εσάς έχει για οποιοδήποτε μοντέλο έναν κωδικό ο οποίος δεν αναγράφεται μέσα στο παρόν θέμα, μπορεί να τον γράψει στο άλλο θέμα κι εμείς θα ενημερώσουμε αντίστοιχα το παρόν, για να είναι όλα μαζεμένα και νοικοκυρεμένα. :grinning-smiley-043

Θα προσπαθήσουμε να βάλουμε τα μοντέλα σε αλφαβητική σειρά, όπως αυτά αναγράφονται και στην πηγή μας. Επίσης στο site της συγκεκριμένης πηγής μπορείτε να βρείτε ακόμα περισσότερους κωδικούς για τυχόν μάρκες οι οποίες δεν αναγράφονται εδώ. Εμείς θα προσπαθήσουμε να μείνουμε στα δικά μας μοντέλα και εταιρίες, που δραστηριοποιούνται στην Ευρώπη και στην Ελλάδα.

ΠΗΓΗ: BRUZZI's FORUM
-bye-




ACER

Akai

AOC

Bang & Olufsen

Daewoo

DELL

Fujitsu

Funai

Grundig

Hitachi

Horizon

HP

Hyundai

Iiyama

JVC

LG

Loewe

Marantz

Matsui

Mitsubishi

NEC

Nokia

PANASONIC

Philips

Pioneer

Proview

Roadstar

Samsung

Sanyo

Schneider

Sharp

Sony

Telefunken

Thomson

Toshiba

Viewsonic

Yamaha
 
Last edited:

panosxgr

Supreme Member
24 June 2006
8,604
Απάντηση: ΚΩΔΙΚΟΙ SERVICE MENU

ACER


LCDs :

* SERVICE MENU 1:
Press and hold the {CH+} & {CH -} buttons on
the TV for few seconds.

* SERVICE MENU 2:
Press and hold the {VOL-} & {CH +} buttons on
the TV for few seconds.

* AUTO ALIGNMENT:
Press and hold the {VOL+} & {CH -} buttons on
the TV for few seconds.

* FACTORY RESET:
Press and hold the {VOL-} & {MENU} buttons on
the TV for few seconds.

* Use the {UP} {DOWN} {LEFT} {RIGHT} buttons on the
remote to move through menus and change settings.

* To exit, press the {MENU} button or turn the power off.



#2 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Turn the Monitor on.
* Press and hold the {DOWN} button and
then turn the power off.

* Now press and hold the {UP} button and
then turn the power on.

* The Service Menu will be displayed.

* To exit, turn the power off.



#3 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Turn the Monitor on.
* Press and hold the {LEFT} button and
then turn the power off.

* Now press and hold the {RIGHT} button and
then turn the power on.

* The Service Menu will be displayed.

* To exit, turn the power off.
 
Last edited:

panosxgr

Supreme Member
24 June 2006
8,604
Απάντηση: ΚΩΔΙΚΟΙ SERVICE MENU

Akai

TVs :


* Turn the TV off.
* Press and hold the {VOL+} & {VOL -} buttons
on the TV and then turn the power on.

* The Service Menu will be displayed.

* Use the {MUTE} and {0-9} numbered buttons to access modes.
* Use the {VOL+} {VOL -} buttons to change settings.

* To exit, turn the power off.



#2 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Turn the TV on.
* Press the {F WHITE} {AUTO} {V CHIP} buttons on the remote.

* The Service Menu will be displayed.

* To exit, turn the power off.



#3 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Turn on the display and select the input that you want to adjust.
* Turn the display off.

* In quick sequence on the remote press:
{MUTE} , {1} , {8} , {2} , {POWER} buttons.

* The Display will turn on with the service menu displayed.
ADJUSTMENT - TEST PATTERN - SET OPTION BYTE - FACTORY RESET

* Select the function and use the {VOL+} to enter the next screen.
* Save settings and exit by pushing {MUTE} twice then {POWER}.



#4 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Turn the TV on.
* Press the {MUTE} {OK} {TV} buttons on the remote.

* The Service Menu will be displayed.

* Use the {UP} {DOWN} buttons to select options.
* Use the {RIGHT} {LEFT} buttons to change settings.
* Press the {OK} button to save settings.

* To exit, press the {TV} button.



#5 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Turn the TV on.
* Press and hold the {VOL -} button on the TV.

* Press the {MENU} button on the remote,
release the {VOL -} button on the TV and
then press the {TV} button on the remote.

* Now to access the Service Menu, press the {i} button.

* Use the {UP} {DOWN} buttons to select options.
* Use the {RIGHT} {LEFT} buttons to change settings.
* Press the {OK} button to save settings.

* To exit, press the {TV} button.
 

panosxgr

Supreme Member
24 June 2006
8,604
Απάντηση: ΚΩΔΙΚΟΙ SERVICE MENU

AOC

LCDs :

* Press the {POWER} and {AUTO} buttons at the same time.
* "Factory1" & "Factory2" Menus will be displayed in the OSD.

* Use the {UP} {DOWN} {LEFT} {RIGHT} buttons
to move through options and change settings.

* To exit, press the {MENU} button.



#2 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* While the LCD is on, unplug the power cable.
* Then press and hold the {MENU} button while
plugging in the power cable.

* The Factory Mode will be displayed.

* Press the [Exit] option to save settings.
* To exit, turn the power off.
 

panosxgr

Supreme Member
24 June 2006
8,604
Απάντηση: ΚΩΔΙΚΟΙ SERVICE MENU

Bang & Olufsen

TVs :

* Using the remote control:
Press the {MENU} button.
Then press the {0} {0} {GO} buttons.

* The Service Menu will be displayed.
* To exit, turn the power off.
 

panosxgr

Supreme Member
24 June 2006
8,604
Απάντηση: ΚΩΔΙΚΟΙ SERVICE MENU

Daewoo

TVs :

* Press the {UP} {MUTE} {DISPLAY} {MUTE}
buttons on the remote control.

* The Service Menu will be displayed.

* Use {CH+} {CH -} buttons to select items.
* Use {VOL+} {VOL -} buttons to change values.

* To exit, press the {MENU} button or turn the power off.



#2 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Press the {VOL -} {MUTE} {DISPLAY} {MUTE}
buttons on the remote control.

* The Service Menu will be displayed.

* Use {CH+} {CH -} buttons to select items.
* Use {VOL+} {VOL -} buttons to change values.

* To exit, press the {MENU} button or turn the power off.



#3 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Press the {1} {MUTE} {DISPLAY} {MUTE}
buttons on the remote control.

* The Service Menu will be displayed.

* Use {CH+} {CH -} buttons to select items.
* Use {VOL+} {VOL -} buttons to change values.

* To exit, press the {MENU} button or turn the power off.



#4 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Press the {1} {MUTE} {RECALL} {MUTE}
buttons on the remote control.

* The Service Menu will be displayed.

* Use {CH+} {CH -} buttons to select items.
* Use {VOL+} {VOL -} buttons to change values.

* To exit, press the {MENU} button or turn the power off.



#5 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Turn the TV off.
* Then press the following buttons using the remote:
{DISPLAY} {MENU} {3} {8} {POWER}

* The Service Menu will be displayed.

* Use {CH+} {CH -} buttons to select menus.
* Use {VOL+} button to access menus.
* Use {CH+} {CH -} buttons to select sub-menus.
* Use {VOL+} {VOL -} buttons to change values.

* To exit, press the {MENU} button.
* To exit and save, turn the power off.



#6 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Select Channel 91.
* Turn "Sharpness" all the way down.
* Exit all menus.
* Press the {RED} {GREEN} {MENU} buttons on the remote.

* The Service Menu will be displayed.

* Use {PROG+} {PROG -} buttons to select items.
* Use {VOL+} {VOL -} buttons to change values.

* To exit, press the {MENU} button or turn the power off.
 

panosxgr

Supreme Member
24 June 2006
8,604
Απάντηση: ΚΩΔΙΚΟΙ SERVICE MENU

DELL

LCDs :

* Turn the Display Off.
* Press and hold the {MENU} & {+} buttons.
* While holding both buttons, turn the Display On.
* Once the Display is on, release all buttons.
* Now press the {-} button.
* The Service Menu will be displayed.
* Press the {MENU} button to exit.

#2 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

* Turn the Display Off.
* Press and hold the {MENU} & {+} buttons.
* While holding both buttons, turn the Display On.
* Once the Display is on, release all buttons.
* Press the {MENU} button and select "Factory Reset".
* Then go to the option "Factory".
* The Service Menu will be displayed.
* Press the {MENU} button to exit.



PLASMAS :

* Press the {INPUT} {6} {1} {9} buttons on the remote.
* The Service Menu will be displayed.

* Input Select: Show Inputs needs to be set to "ALL" .
If it is set to "ACTIVE", It'll NOT work.



<<< WARNING - WARNING - WARNING - WARNING - WARNING >>>
Do NOT Hit the OK Button while the "ADC Calibration" option is selected
on the service menu. Apparently, this will recalibrate the Dell W5001C
according to whatever is being fed via the HDMI input. In the factory, a
proprietary image (provided by Pixelworks) is used. If you do it at home,
you may as well kiss the set goodbye. It cannot be undone, and you will
likely have to return the set.
 

panosxgr

Supreme Member
24 June 2006
8,604
Απάντηση: ΚΩΔΙΚΟΙ SERVICE MENU

Fujitsu

PLASMAS :


* Fujitsu has a Service Menu with limited function.
* Press and hold the {ENTER} button on the remote
until the Service Menu is displayed:

Monitor Mode A - Monitor Mode B - Extend Adjust

* Using the remote keys, select a Mode and press {ENTER} to access it.

* Monitor Mode A :
Fan Settings
Temperature Reading
Hours Meter

To determine total hours, add RGB and video for the total hours on the plasma
(each number represents hours on that selected input).
Disregard total hours. That's the number of hours the Plasma is plugged in.

* Monitor Mode B :
Shows error codes, if any.

* Extend Adjust :
Fan Mode
AGC
V Screen Orbiter
RS232 Baud Rate
Default (CAUTION: pressing default will reset the hours counter to zero).

* Press menu to toggle from one menu to another.
 

panosxgr

Supreme Member
24 June 2006
8,604
Απάντηση: ΚΩΔΙΚΟΙ SERVICE MENU

Funai
Emerson / Symphonic

TVs :


* Enter Menu or Picture Menu.

* Then press the {9} {3} {0} {1} buttons.

* The Service Menu will be displayed.

* To exit, press the {MENU} button or turn the power off.

#2 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

* Enter the Main Menu.
or
Enter the Main Menu and access the Install Menu.

* Then press the {4} {7} {2} {5} buttons.

* The Service Menu will be displayed.

* Use the {UP} {DOWN} buttons to select items.
* Use the {LEFT} {RIGHT} buttons to change settings.

* To exit, press the {MENU} or {EXIT} buttons.

||||[ Vestel ]||||

#3 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Turn the power on using the {POWER} button on the TV.
* Press the {POWER} {2} {7} {1} {MUTE} buttons on the remote.

* The Service Menu will be displayed.

* To exit, press the {POWER} button on the remote.


#4 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Press the {1} {MUTE} {DISPLAY} {MUTE}
buttons on the remote control.

* The Service Menu will be displayed.

* Use {CH+} {CH -} buttons to select items.
* Use {VOL+} {VOL -} buttons to change values.

* To exit, press the {MENU} button or turn the power off.

||||[ Daewoo ]||||


#5 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Press the {1} {MUTE} {RECALL} {MUTE}
buttons on the remote control.

* The Service Menu will be displayed.

* Use {CH+} {CH -} buttons to select items.
* Use {VOL+} {VOL -} buttons to change values.

* To exit, press the {MENU} button or turn the power off.

||||[ Daewoo ]||||


#6 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Turn volume all the way down to '0'

* Then press and hold the {VOL -} button on the TV and
the {9} button on the remote control for few seconds.

* The Service Menu will be displayed.

* Use the {CH+} {CH-} buttons to select items.
* Use the {VOL+} {VOL-} buttons to change values.

* To exit, turn the power off.

||||[ Orion ]||||


#7 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Turn volume all the way down to '0'

* Then press and hold the {VOL -} button on the TV and
the {0} button on the remote control for few seconds.

* The Service Menu will be displayed.

* Use the {CH+} {CH-} buttons to select items.
* Use the {VOL+} {VOL-} buttons to change values.

* To exit, turn the power off.
 

panosxgr

Supreme Member
24 June 2006
8,604
Απάντηση: ΚΩΔΙΚΟΙ SERVICE MENU

Grundig

TVs :


* With the TV in standby:
* Press and hold the {i} button on the remote
while pressing the {POWER} button on the TV.

* The TV will turn on with the Service Menu displayed.

* Use the {UP}{DOWN} buttons to select menus/options.
* Use the {LEFT}{RIGHT} buttons to change settings.

* To exit, turn the power off.



#2 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Press the {i} button.
* Then press 'OK' - 'SERVICE' - 'OK'.
* Enter Service Code '8500'.

* The Service Menu will be displayed.

* Use the {UP}{DOWN} buttons to select menus/options.
* Use the {LEFT}{RIGHT} buttons to change settings.

* To exit, turn the power off.



#3 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

* Press and hold the {i} button.
* Then enter service code '8500'.

* The Service Menu will be displayed.

* Use the {UP}{DOWN} buttons to select menus/options.
* Use the {LEFT}{RIGHT} buttons to change settings.

* To exit, press the {TXT} button.



#4 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* With the TV in standby:
* Press and hold the {P/C} button on the remote
while pressing the {POWER} button on the TV.

* The TV will turn on with the Service Menu displayed.

* To exit, turn the power off.



#5 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Press the {DISPLAY} {MUTE} {SLEEP} {FUZZY}
buttons on the remote control.

* The Service Menu will be displayed:

o Factory 1
o Factory 2
o Factory 3

* Use {VOL+} {VOL -} buttons to access menus.
* Use {CH+} {CH -} buttons to change values.

* To exit, turn the power off.



#6 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Turn the TV off.
* Press and hold the {MENU} button on the TV
while pressing the {POWER} button on the TV.

* Wait until the power light turns on then
press the {POWER} button on the remote.

* The Service Menu will be displayed.

* Use the {P+} {P-} buttons to select options.
* Use the {VOL+} {VOL-} buttons to change settings.

* To exit, turn the power off.
 

panosxgr

Supreme Member
24 June 2006
8,604
Απάντηση: ΚΩΔΙΚΟΙ SERVICE MENU

Hitachi

PLASMAS :


* Turn the TV off..
* Press and hold the {POWER} and {INPUT} buttons at the
same time on the A/V Media Box for at least 5 seconds.

* Release the {POWER} button first and then immediately
release the {INPUT} button.

* The TV will turn on with the Service Menu displayed.

* Use the {MENU} button to move through menus.
* Use the {UP} {DOWN} buttons to select options.
* Use the {LEFT} {RIGHT} buttons to change settings.

* To exit, turn the power off.



#2 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Put the TV in standby.
* Press and hold the {POWER} {INPUT} {DOWN} buttons
at the same time on the TV for at least 5 seconds.

* The TV will turn on with the Service Menu displayed.

* Use the {UP} {DOWN} buttons to select options.
* Use the {LEFT} {RIGHT} buttons to change settings.
* Press the {OK} button to save settings.

* To exit, press the {MENU} button.




MISC TVs :


* Turn the TV on.
* Press {MENU} {MENU} {8} {SELECT} buttons on the remote.
* The Service Menu will be displayed.

* Use the {UP} {DOWN} buttons to select options.
* Use the {LEFT} {RIGHT} buttons to change settings.

* Press the {EXIT} button to exit the Service Menu.



#2 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Turn the TV off.
* Press and hold the {POWER} and {INPUT} buttons on the TV.
* Hold both buttons until the TV powers on
with the Service Menu displayed.

* Use the {UP} {DOWN} buttons to select options.
* Use the {LEFT} {RIGHT} buttons to change settings.

* To exit, press the {EXIT} button or turn the power off..



#3 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* PICTURE ADJUSTMENT MODE :
Press and hold {POWER} and {INPUT} buttons
on the TV for more than 5 seconds.

* AUDIO ADJUSTMENT MODE :
Press and hold {POWER} and {INPUT} buttons
on the TV for 3-5 seconds.

* Use the {UP} {DOWN} buttons to select options.
* Use the {LEFT} {RIGHT} buttons to change settings.

* To exit, press the {POWER} button.



#4 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Press the {I} {M} {P} buttons.

* The Service Menu will be displayed.

* Use the {UP}{DOWN} buttons to select options.
* Use the {LEFT}{RIGHT} buttons to change settings.
* Press the {M} button to save settings.

* To exit, press the {TV} button.



#5 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Press the {SETUP} button and select "Cable Mode".
* Select "Timer" menu and set sleep timer to 30 min.
* Press {MENU} or {OK} buttons twice to exit menus.
* Tune to channel 124.
* Turn the volume all the down to '0'.
* Then press and hold {VOL -} button ON THE TV.

* "CHK" appears in on top-left corner.

* While the "CHK" is displayed, press the {MENU} & {VOL+} buttons
ON THE TV simultaneously to toggle between Modes:

Red "CHK" for Serviceman — Yellow "CHK" for Aging

* Press the {POWER} button on the remote to move through modes.
* Use the {CH+} {CH -} on the remote to select options.
* Use the {VOL+} {VOL -} on the remote to change settings.

* To exit, press the {MENU} and {POWER} buttons on the TV.



RPTVs :


* Press and hold the {MENU} button on the TV.
* Then press the {MENU} {8} {SELECT} buttons on the remote.
* To exit, press the {MENU} button on the TV or
the {EXIT} button on the remote control.

DCAM Mode:

* Using the remote control:
* Hold down the {TV} button.
* Press the {MENU} button.
* Press the {INFO} button.
* Release the {TV} button.

Remote Control Key Functions When In DCAM Mode:

{INPUT} ............. Blue (13x9 adjust)
{ASPECT} ............ ROM Write
{DAY/NIGHT} ......... ROM Read
{MENU} .............. Remove Color
{EXIT} .............. Cross Hatch/Video Mode
{INFO} .............. Green
{GUIDE} ............. Calculation
{2} ................. Cursor UP
{5} ................. Cursor DOWN
{6} ................. Cursor RIGHT
{4} ................. Cursor LEFT
{0} ................. RED (7x5 Adjust)
{STOP} .............. Initialize
{PLAY} .............. Raster Position
{FAST FORWARD} ...... Phase


To Exit The DCAM Mode:

* Press and hold the {TV} button.
* Press the {0} button.
* Press the {1} button.
* Release the {TV} button.


Access code posted by jones07 @ AVS Forum


#2 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Turn the TV off and wait at least 2 minutes.
* Press and hold the {INPUT} and {POWER} buttons
* on the TV for about 2 seconds.

* The TV will turn on with the Service Menu displayed.

* Use the {UP} {DOWN} buttons to move through options.
* Press the {RIGHT} button for 2 seconds to access options.
* Use the {LEFT} {RIGHT} buttons to change settings.

* Press the {EXIT} button to exit the Adjustment Mode.
* Press the {EXIT} button again to exit the Service Menu.
 

panosxgr

Supreme Member
24 June 2006
8,604
Απάντηση: ΚΩΔΙΚΟΙ SERVICE MENU

Horizon

TVs :


* Enter the 'Main Menu'.
* Then press the {4} {7} {2} {5} buttons.

* The Service Menu will be displayed.

* Use the {UP} {DOWN} buttons to select items.
* Use the {LEFT} {RIGHT} buttons to change settings.

* To exit, press the {MENU} button or turn the power off.

||||[ Vestel ]||||


#2 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Enter the 'Main Menu' and access the 'Install Menu' .
* Then press the {4} {7} {2} {5} buttons.

* The Service Menu will be displayed.

* Use the {UP} {DOWN} buttons to select items.
* Use the {LEFT} {RIGHT} buttons to change settings.

* To exit, press the {MENU} button or turn the power off.
 

panosxgr

Supreme Member
24 June 2006
8,604
Απάντηση: ΚΩΔΙΚΟΙ SERVICE MENU

HP

LCDs :


* While the LCD is on, unplug the power cable.
* Then while pressing the {INPUT} & {VOL -} buttons on the remote,
plug the power cable back into the outlet.

* When it powers up you will see a little "k" appear in brackets.
* Then on the TV, press and hold {VOL -} & {CH -} down and release.
* The Service Menu will be displayed.

* Use {CH+} {CH -} buttons to navigate
* Use {VOL+} {VOL -} buttons to adjust the value.

* Turn the set off to exit the Service Menu.

||||[ Sharp ]||||







PLASMAS :


PL-4260N / PL-5060N

* Turn the TV on.
* Press the {MENU} button and select "User OSD Menu".
* Select "Audio", "Settings" and then "Balance".
* Press the {9} {1} {8} {OK} buttons on the remote.
* The Service Menu will be displayed.

Remote - Control Keys:

{MENU} ................ Enter/Exit the Service Menu
{UP} {DOWN} arrows .... Select Items
{RIGHT} arrow ......... Enter Lower-Level Menus
{RIGHT} {LEFT} arrows . Change Adjustment Values
{BACK} ................ Return to Upper-Level Menu

TV - Control Keys:

{MENU} ................ Enter/Exit the Service Menu
{CH+} {CH-} ........... Select Items
{VOL+} ................ Enter Lower-Level Menu
{VOL+} {VOL-} ......... Change Adjustment Values


* To exit, press {9} {1} {8} {9} buttons on the remote.

NOTE: If the “M” character appears on the screen,
press the {MENU} button first.



xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx



PE-4200N / PL-4200N / PL-5000N

* Hold down {VOL -} button ON THE PLASMA TV.
* While still holding down the {VOL -} button,
press {RECALL} on the remote 3 times.

* The Service Menu will be displayed.

* Use the {1} {2} button to navigate main menu items.
* Use the {3} {4} buttons to navigate sub-menu items.
* Use the {VOL+} {VOL -} buttons to change settings.

* To exit, turn the power off.
 

panosxgr

Supreme Member
24 June 2006
8,604
Απάντηση: ΚΩΔΙΚΟΙ SERVICE MENU

Hyundai

TVs :


* Press the {MUTE} {MENU} {OK} {SLEEP} buttons on the remote.

* The Service Menu will be displayed.

* To exit, turn the power off.



#2 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx


* Press the {MENU} {4} {7} {2} {5}
buttons on the remote control.

* The Service Menu will be displayed.

* There are 4 Menus available:
Display - Calibration - Deinterlacer - Factory Settings

* Use the {LEFT} {RIGHT} buttons to select a Menu.
* Use the {UP} {DOWN} buttons to select Menu options and
then the {LEFT} {RIGHT} or {OK} buttons to change values.

* To exit, press the {MENU} button.

||||[ Vestel ]||||


#3 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx


* Press the {MENU} {SAP} {SLEEP} {MAGIC}
buttons on the remote control.

* The Service Menu will be displayed.

* To exit, turn the power off.



#4 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx


* Press the {CAPS} {REVEAL} buttons on the remote.
* The Service Menu will be displayed.

* Use the {REVEAL} button to move through menus.
* Use the {P +} {P -} buttons to select items.
* Use the {VOL+} {VOL-} buttons to change settings.

* Press the {OK} button to save and exit.
 

panosxgr

Supreme Member
24 June 2006
8,604
Απάντηση: ΚΩΔΙΚΟΙ SERVICE MENU

Iiyama

MONITORS :


* Turn the Display off.
* Press the {POWER} button twice while
holding down the {MENU} button.

* Then press the {POWER} button again
while holding down the {-} button.

* Press the {MENU} button to enter the Service Mode.

* To exit, press the {POWER} button.
 

panosxgr

Supreme Member
24 June 2006
8,604
Απάντηση: ΚΩΔΙΚΟΙ SERVICE MENU

JVC

PLASMAS / LCDs / CRTs / RPTVs :


* Press the {MENU} button and go to the User Menu screen, make sure
that the indicator (arrow) is pointed and highlights the "Picture Control".

* The buttons on top of the remote are set to TV & VCR respectively.

* Set sleep timer to "0" minutes and while it is displayed, simultaneously
press the {VIDEO STATUS} & {DISPLAY} buttons.

* The Service Menu will be displayed.

* Use the number keys {1-9} to select a category.
* Use the {CH+} {CH-} buttons to select options.
* Use the {VOL+} {VOL-} buttons to change settings.
* Use the {MUTING} button to save settings.

* Press the {BACK} button to exit the Service Menu.



#2 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Turn the TV on.
* Using the remote control:

* Press the {INFO} & {MUTE} buttons at the same time.

* The Service Menu will be displayed

* Use the number keys {1-9} to select a category.
* Use the {VOL+} {VOL-} buttons to enter the category.
NOTE: Some models don't have category selection.

* Use the {CH+} {CH-) buttons to select options.
* Use the {VOL+} {VOL-} buttons to change settings.

* To exit, press the {INFORMATION} button.



#3 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Turn the TV on.
* Using the remote control:

* Press {DISPLAY} & {PIC MODE} buttons at the same time.

* The Service Menu will be displayed

* Use the number keys {1-9} to select a category.
* Use the {UP} {DOWN} buttons to enter the category.
* Use the {LEFT} {RIGHT} buttons to select options.
* Use the {UP} {DOWN} buttons to change settings.

* To exit, press the {DISPLAY} button twice.



#4 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Press the {MENU} button.
* Select "Clock Set".
* Set clock to 3:21 AM and press "Start Clock".

* While a "Thank You" message is displayed on screen,
press the {MUTE} and {MENU} buttons.

* The Service Menu will come up.

* Use {UP} {DOWN} to select options.
* Use {LEFT} {RIGHT} to change settings.

* To exit, turn the power off.



#5 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Press the {DISPLAY} and {PIC MODE} buttons
at the same time on the remote control.

* The Service Menu will be displayed.

* Use the {MENU UP} {MENU DOWN} buttons to select options.
* Use the {MENU +} {MENU -} buttons to change settings.
* Press the {DISPLAY} button to exit menus.

* Press the {DISPLAY} button again to exit the Service Menu.
 

panosxgr

Supreme Member
24 June 2006
8,604
Απάντηση: ΚΩΔΙΚΟΙ SERVICE MENU

LG

TVs :


* Service Menu #1

Press and hold the {MENU} button on the remote and
the {MENU} button on the TV at the same time,
until the first Service Menu is displayed.

* Service Menu #2

Repeat the above sequence:
Press and hold the {MENU} button on the remote and
the {MENU} button on the TV at the same time,
until the second Service Menu is displayed.



#2 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Press and hold the {MENU} button on the remote
and the {MENU} button on the TV at the same time

* If a password screen comes up:

Press and hold the {MENU} button on the remote
and the {MENU} button on the TV at the same time
again, until the Service Menu is displayed.



#3 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Press and hold the {MENU} button ON THE REMOTE
until a 4-digit password screen is displayed.

* Then try any of the following codes to
access the Service Menu:

{0} {0} {0} {0}
{7} {7} {7} {7}
{8} {7} {4} {1}



#4 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Press and hold the {MENU} button ON THE REMOTE.
(The menu on the screen will disappear)

* Now Press and hold the {MENU} button ON THE PANEL.
* Keep both buttons pressed until the Service Menu
is displayed, then release the 2 buttons.

* Using the remote control buttons:


{MENU} = Toggles between two menu pages.
{UP} {DOWN} = Selects the item for adjustment.
{LEFT} {RIGHT} = Varies the value
{POWER} = Exit service mode and saves adjustments made.



#5 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Turn the TV on.
* Hold down the {MENU} button on remote until the on-screen menu
disappears or "Welcome Message" appears then release the {MENU}
button and within two (2) seconds press the following five buttons:

{9} {8} {7} {6} {ENTER}
or
{9} {8} {7} {6} {DISPLAY}

* The Service Menu will be displayed.

* Using the remote control buttons:

{MENU} = Toggles between two menu pages.
{UP} {DOWN} = Selects the item for adjustment.
{LEFT} {RIGHT} = Varies the value
{POWER} = Exit service mode and saves adjustments made.
 

panosxgr

Supreme Member
24 June 2006
8,604
Απάντηση: ΚΩΔΙΚΟΙ SERVICE MENU

Loewe

TVs :


* Press the {MENU} button on TV's front panel.
* Select the "Service" menu option.
* Press the {MENU} button on the remote.

* The Service Menu will be displayed.

* To exit, turn the set Off.


<<<< WARNING - WARNING - WARNING - WARNING - WARNING >>>>
Adjust option bits that are highlighted only. The other option bits
are for Authorized Technicians. If incorrectly adjusted, some option
bits can cause unrecoverable system failures.


#2 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Press the {FUNCTION} button on TV's front panel.

* Press and hold the {CH -} button on the remote
until the Service Menu is displayed.

* Using the remote control buttons:

{CH+} {CH -} buttons move through menus
{OK} button makes selections
{VOL+} {VOL -} buttons change menu items
{OK} button saves a particular setting

* To exit, turn the set Off.


<<<< WARNING - WARNING - WARNING - WARNING - WARNING >>>>
Adjust option bits that are highlighted only. The other option bits
are for Authorized Technicians. If incorrectly adjusted, some option
bits can cause unrecoverable system failures.


#3 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Press the {MENU} button 5 times on TV's front panel.
A "Service" message will appear on screen.

* Then press the {MENU} button on the remote.

* The Service Menu will be displayed.

* To exit, turn the set Off.


<<<< WARNING - WARNING - WARNING - WARNING - WARNING >>>>
Adjust option bits that are highlighted only. The other option bits
are for Authorized Technicians. If incorrectly adjusted, some option
bits can cause unrecoverable system failures.
 

panosxgr

Supreme Member
24 June 2006
8,604
Απάντηση: ΚΩΔΙΚΟΙ SERVICE MENU

Marantz

LCDs :


* Press the {MENU} {SAP} {SLEEP} {MAGIC}
buttons on the remote control.

* The Service Menu will be displayed.

* To exit, turn the power off.
 

panosxgr

Supreme Member
24 June 2006
8,604
Απάντηση: ΚΩΔΙΚΟΙ SERVICE MENU

Matsui

TVs :


* With the TV in standby:
* Press and hold the {i} button on the remote
while pressing the {POWER} button on the TV.

* The TV will turn on with the Service Menu displayed.

* Use the {UP}{DOWN} buttons to select menus/options.
* Use the {LEFT}{RIGHT} buttons to change settings.

* To exit, turn the power off.



#2 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Turn the TV off.
* Press and hold the {MENU} button on the TV
while pressing the {POWER} button on the TV.

* Wait until the power light turns on then
press the {POWER} button on the remote.

* The Service Menu will be displayed.

* Use the {P+} {P-} buttons to select options.
* Use the {VOL+} {VOL-} buttons to change settings.

* To exit, turn the power off.




#3 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

* Turn volume all the way down to '0'

* Then press and hold the {VOL -} button on the TV and
the {9} button on the remote control for few seconds.

* The Service Menu will be displayed.

* Use the {CH+} {CH-} buttons to select items.
* Use the {VOL+} {VOL-} buttons to change values.

* To exit, press the {8} button.



#4 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


* Press the {MENU} button.
or
* Press the {MENU} button and access the 'Install' Menu.

* Then press the {4} {7} {2} {5} buttons.

* The Service Menu will be displayed.

* Use the {UP} {DOWN} buttons to select items.
* Use the {LEFT} {RIGHT} buttons to change settings.

* To exit, press the {MENU} or {EXIT} buttons.
 
Status
Not open for further replies.