Επίσης αφου τα σετάρεις όλα, τσέκαρε και αυτό....
INSTALLATION
Easy Method
1. Go to Start
Computer [Right-click]
Properties [Select]
2. Device Manager [Select]
Monitors[Expand]
Monitor ID [Righ-Click] (usually "Generic PnP Monitor")
Properties [Select]
Driver tab [Select]
Update Driver button [Select].
3. Make sure that the .inf driver is the ONLY one in its dir
Browse my computer for driver software [Select]
Let me pick from a list of device drivers on my computer [Select]
Have Disk [Select]
Browse to the directory where .inf driver is located.
Click on .inf file and then on the Open button
OK [Select]
Next [ Select]
Confirm installation if necessary ([Windows Security] Install this driver software anyway)
Close [Select]
REBOOT
Alternate method
If you have more than 1 monitor setup you most probably will have more than one "Generic PnP Monitor" device in the Monitors tab. Use this alternate procedure for these cases.
1. Mouse on Desktop [Right-click]
Personalize [Select]
2. Display [Select]
Change display settings [Select]
Screen of the display device to override [Select]
Advanced settings [Select]
Monitor Tab [Select]
Properties button [Select]
Driver tab [Select]
Update Driver button [Select]
3. Follow step 3 from Easy Method above
3. EDID CAPTURE with MONINFO
The EDID Override mod for solving the bitstreaming and/or video handshake issues on the 5xxxs is usually made up by a combination
of the display device video data stored in its corresponding EDID + the audio descriptors of Onkyo TX-NR906 EDID that solves
the bitstreaming issues + rest of information stored in the AVR/AVP EDID.
So, the 2 EDIDs (display device & AVR/AVP) are required to do the mod. Also the full REAL-TIME (no registry entries) 256-byte EDIDs are required. But NOTE that, so far, Moninfo cannot capture the full REAL-TIME EDIDs on the 5xxxs, and I know of no other method to do it.
Display Device EDID Capture
1. Connect the graphic card HDMI-in to your display device HDMI-out.
2. Launch Moninfo.
"[Real time ...]" entry on top left "Display IDs" window [Select]
File [Select]
Create INF [Select]
SAVE TO [Your display device name].inf. (e.g. Samsung LN-S4095D)
AVR/AVP EDID Capture
1. Connect the graphic card HDMI-in to your AVR/AVP HDMI port.
[Optionally] Connect the AVR HDMI port to the display device HDMI-out.
2. Launch Moninfo.
"[Real time ...]" entry on top left "Display IDs" window [Select]
File [Select]
Create INF [Select]
SAVE TO [Your display AVR/AVP name].inf. (e.g. DENON AVR988)
http://rapidshare.com/files/348337294/EDID_Overrides.zip.html