[FONT=Arial,Helvetica,sans-serif] One HDMI Input, Eight HDMI Outputs[/FONT] [FONT=Arial, Helvetica, sans-serif] The 2:8 HDMI™ Distribution Amplifier is the perfect solution for anyone who needs to send one or two sources of digital high definition video to multiple displays at the same time. It supports allHDMI™I equipment, such as DVD players and satellite set top boxes and all HDMI displays. HDMI (High-Definition Multimedia Interface) is a digital point to point interface for audio and video signals. In operation, the digital source is connected to the distribution amplifier on one side. On the other side, eight HDMI outputs are available to be used in part or in full. Once the unit is connected and powered, your source is routed to up to eight digital displays at the same time.
For home theater applications, the unit is HDCP (high bandwidth digital content protection) compliant, making it effective for use with all HDMI displays. HDCP is a standard "key" encoded into the HDMI signal to prevent video data from being pirated. HDCP was strongly endorsed by the entertainment industry. If a source device is HDCP coded and is connected to a HDMI display or projector via HDMI without the proper HDCP decoding mechanism, the picture is relegated to "snow" or in some cases, a very low (480P) resolution. In order to see protected content, the source, the display and any device in between must be equipped with HDMI connections that can enable HDCP using "software key" decoding[/FONT]
[FONT=Arial, Helvetica, sans-serif][SIZE=-1]How it works [FONT=Arial, Helvetica, sans-serif] Simply connect your HDMI™ video source to the 2:8 HDMI Distribution Amplifier's input using the supplied HDMI cable. Then connect up to eight HDMI displays to the unit's eight HDMI outputs. Once connected and powered, your source will be seen on all eight displays at the same time [/FONT][/SIZE][/FONT]
[FONT=Arial, Helvetica, sans-serif][SIZE=-1][FONT=Arial, Helvetica, sans-serif]Note:HDMI output 1 is the primary connection and is used for the main display. HDMI output 2 through 8 follow the main display. The HDMI displays attached to the 2:8 HDMI Distribution Amplifier MUST have the same native resolution in order to get a picture.
This HDMI product supports BOTH Audio and Video signals.
- supports Consumer Electronics Control (CEC) based on the AV.link protocol so it can be controlled with a universal remote that is used with multiple HDMI sources such as DVD players or satellite set-top boxes.
- supports bi-directional communication between devices, allowing the DTV to communicate its preferred audio/video formats to the set-top box, and the set-top box to communicate what video format it is providing to the display. This enables the DTV to make intelligent decisions on how to render any given image in the format designated by the original film providers.
- supports every uncompressed standard, enhanced and high definition video format ranging from 480I to 480P, 720P, 1080I and 1080P as well as existing PAL formats.
- has the bandwidth to support compressed audio formats such as Dolby Digital, Dolby Digital EX, DTS, DTS EX and uncompressed formats (PCM audio) up to eight channels, up to 192kHz, up to 24-bits.
- supports most standard PC monitor formats, such as VGA, XGA and SXGA—all in a single HDMI cable.
[FONT=Arial, Helvetica, sans-serif][SIZE=-1][FONT=Arial, Helvetica, sans-serif]Note: HDMI output 1 is the primary connection and is used for the main display. HDMI output 2 through 8 follow the main display. The HDMI displays attached to the 1:8 HDMI Distribution Amplifier MUST have the same native resolution in order to get a picture.
This HDMI product supports BOTH Audio and Video signals.
Ελπιζω να ειναι ιδιες τουλαχιστον οι πλασμα.
[/FONT][/SIZE][/FONT][FONT=Arial, Helvetica, sans-serif][SIZE=-1][FONT=Arial, Helvetica, sans-serif]Τωρα θες να αρχισω παλι με τα @#$%gefen ???:argue: [/FONT][/SIZE][/FONT]
Long Distance HDMI Cables
Copper based cables with lengths of 25, 30 and 50 feet. The 1-30 foot HDMI cables support the following resolutions: 480i, 480p, 720p, 1080i, 1080p. The 50 foot HDMI cable support resolutions up to 1080i. These cables are HDCP compliant. With a HDMI Booster the 40 and 50 foot cables are good for resolutions up to 1080p.
Δες και αυτο.Μπορουμε να στο δωσουμε για test πριν το αγορασεις.
1:8 ATLONA HDMI DISTRIBUTION AMPLIFIER #AT-HDMI18
Atlona 1:8 HDMI Distribution Amplifier. Model: AT-HDMI18
Atlona 1:8 HDMI distribution amplifier is a unique device that allows connecting any of the digital video sources, such as: DVD, Satellite, Cable Box, PC, Xbox, PS3 and more with HDMI output to up to 8 digital displays. AT-HDMI18 splitts hdmi signal up to 8 outputs without signal loss.
Connect HDMI cable from the digital source to an input of Atlona AT-HDMI18. Connect up to 8 displays to any of the 8 outputs on the AT-HDMI18. Atlona HDMI splitter distributes HDMI ( digital audio/video ) signal to all 8 displays simutaneously. Recommended to use high-quality hdmi cables for the best signal transfer.
Built-in EDID simulator and HDCP keyset allows each output to work independently when connecting to a HDMI display.
Splits an HDMI source up to 8 outputs without signal loss.
Supports DVI source and DVI display by using HDMI to/from DVI adaptor cable.
Supports a wide range of PC and HDTV resolutions from VGA to UXGA and 480p to 1080p.
Can be cascaded up to 3 layers
Each of the buffered output can run up to 15 Meters without a booster
Video Amplifier Bandwidth:1.65 GHz
HDMI Input/Output Connector: Type A 19-pin
Power Consumption: 6W Max
Power Supply: 5V DC Universal 110/220
Dimensions: 9 1/2” W x 4” D x 1 1/2” H