Θα ηθελα την γνωμη των ειδικων σε οτι αναφορά το ηλεκτρικο ταιριασμα των παρακατω,παραπανω στοιχεια δεν εχω βρει αν δεν βγαινει ακρη δεν πειραζει.
πρo:
ANALOGUE
Analog inputs: 2 pairs of unbalanced RCA
Analog output:
-Unbalanced 1 system (fixing of output level/variable change-over Switch attachment)
-Balanced 1 system (configuration, 3rd pin HOT)
-Head phone 1 system
Line input sensitivity/Input impedance: 290mV/24kohm
Line output voltage:
-Imbalance: Digital input (fixing output) 2.5V
-(Variable output) 8.7V and analog input (fixed output) 290mV
-(Variable output) 1.0V (installed capacity 10.0V)
-Balance: 2.5V
Head phone output: 130mW+130mW (600ohm), 80mW+80mW (32ohm), 40mW+40mW (16ohm)
Line output impedance: Unbalanced: 400ohm and Balanced: 600ohm
Frequency Response:
-Digital input: 2Hz - 60kHz (+0, - 3.0dB)
-Analog input: 3Hz - 130kHz (+0, - 3.0dB)
Harmonic Distortion:
-Digital input: 0.0009% (unbalanced), 0.0006% (balanced)
-Analog input: 0.003% (1kHz)
signal-noise ratio (IHF-A): Digital input: 119dB and analog input: 103dB
Power supply voltage: AC 115V (50/60Hz)
Electric power consumption: 11W
Dimensions (mm): W 14.3" (364) x H 3" (81) x D 11" (279) mm
Weight (kg): 11 lbs. (5.1)
τελικος
Type: solid-state single MOSFET stereo power
amplifier
Power output (per channel, continuous):
200W/8Ω, 400W/4Ω
Frequency response: 5Hz ~ 100kHz
THD: ‹ 0.05%
Noise level: › 100dBA below 100W/8Ω
Input impedance: 40kΩ balanced, 20kΩ RCA
Sensitivity: 0.77V, 1.55V, 3.1V, 3.9V (full power)
Speaker loads: down to 1.5Ω
Idle power consumption: 100 W
Dimensions: 17.6 x 6.1 x 17
Weight: 68lb
πρo:
ANALOGUE
Analog inputs: 2 pairs of unbalanced RCA
Analog output:
-Unbalanced 1 system (fixing of output level/variable change-over Switch attachment)
-Balanced 1 system (configuration, 3rd pin HOT)
-Head phone 1 system
Line input sensitivity/Input impedance: 290mV/24kohm
Line output voltage:
-Imbalance: Digital input (fixing output) 2.5V
-(Variable output) 8.7V and analog input (fixed output) 290mV
-(Variable output) 1.0V (installed capacity 10.0V)
-Balance: 2.5V
Head phone output: 130mW+130mW (600ohm), 80mW+80mW (32ohm), 40mW+40mW (16ohm)
Line output impedance: Unbalanced: 400ohm and Balanced: 600ohm
Frequency Response:
-Digital input: 2Hz - 60kHz (+0, - 3.0dB)
-Analog input: 3Hz - 130kHz (+0, - 3.0dB)
Harmonic Distortion:
-Digital input: 0.0009% (unbalanced), 0.0006% (balanced)
-Analog input: 0.003% (1kHz)
signal-noise ratio (IHF-A): Digital input: 119dB and analog input: 103dB
Power supply voltage: AC 115V (50/60Hz)
Electric power consumption: 11W
Dimensions (mm): W 14.3" (364) x H 3" (81) x D 11" (279) mm
Weight (kg): 11 lbs. (5.1)
τελικος
Type: solid-state single MOSFET stereo power
amplifier
Power output (per channel, continuous):
200W/8Ω, 400W/4Ω
Frequency response: 5Hz ~ 100kHz
THD: ‹ 0.05%
Noise level: › 100dBA below 100W/8Ω
Input impedance: 40kΩ balanced, 20kΩ RCA
Sensitivity: 0.77V, 1.55V, 3.1V, 3.9V (full power)
Speaker loads: down to 1.5Ω
Idle power consumption: 100 W
Dimensions: 17.6 x 6.1 x 17
Weight: 68lb