ΒΟΗΘΕΙΑ ΓΙΑ ΑΓΟΡΑ ΠΙΣΩ ΗΧΕΙΩΝ
- Thread starter billkarras
- Start date
Γ.CURE.ΔΗΜ
AVClub Enthusiast
ββ
αφου μπροστά παίζεις Jamo μάλλον και πίσω κάτι απο την ίδια σειρά θα πρότεινα, να μην έχεις προλήματα συνέργειας
ΕΧΟΥΝ 85DB ΕΥΑΙΣΘΗΣΙΑ ΤΑ ΜΠΡΟΣΤΙΝΑ ΟΜΩΣ ΚΑΙ ΤΟ ΚΕΝΤΡΙΚΟ ΕΧΟΥΝ 91 ΔΕΝ ΚΑΝΟΥΝ ΜΕ ΤΙΠΟΤΑ.ΚΑΜΙΑ ΑΛΛΗ ΙΔΕΑ?
audiophile62
AVClub Enthusiast
SR5 Specification
Description 2 way on-wall stereo/surround loudspeaker
Enclosure type Sealed enclosure
Drive units HF
25mm coated fabric dome, damped vented enclosure
Drive units LF/MF
140mm ep38 polymer cone
Drive units LF -
Frequency response
90Hz-20kHz ± 3dB on reference axis
Frequency range
-6dB at 70Hz
Dispersion Within 3dB of response on reference axis
Horizontal over 40° arc ( ±20°)
Vertical over 20° arc ( ±10°)
Sensitivity for 1W @ 1m
88dB
Impedance nominal 8 ohms
Impedance minimum 6.0 ohms
Crossover frequencies 5.0kHz
Power handling 15 - 125 watts into 8 ohms unclipped
Harmonic distortion
<1% 100Hz – 20kHz 90 dB @ 1m
Connections
2/3 way gold plated bi-wirable terminals
Magnetic shielding All drive units completely screened
Dimensions H x W x D 309 x 311 x 176mm (12.1 x 12.2 x 6.9in)
Plinth maximum W x D -
Spikes/feet/stand height -
Net weight 5.8kg (12.8lb)
Shipping weight 6.9kg (15.2lb)
Accessories supplied Stainless steel wall bracket and fixings
Cabinet real wood veneer finishes Cherry, Maple, Rosenut, Black Ash
Spendor products are designed and manufactured in the UK by Spendor Audio Systems Ltd
Spendor Audio Systems Ltd reserve the right to alter designs and specifications without notice
Spendor is a registered trademark of Spendor Audio Systems Ltd. Kevlar is a registered trademark of DuPont.
© Copyright 2003 Spendor Audio Systems Ltd. All rights reserved.
Compare with other 'S' Series models Return to 'S' series
Description 2 way on-wall stereo/surround loudspeaker
Enclosure type Sealed enclosure
Drive units HF
25mm coated fabric dome, damped vented enclosure
Drive units LF/MF
140mm ep38 polymer cone
Drive units LF -
Frequency response
90Hz-20kHz ± 3dB on reference axis
Frequency range
-6dB at 70Hz
Dispersion Within 3dB of response on reference axis
Horizontal over 40° arc ( ±20°)
Vertical over 20° arc ( ±10°)
Sensitivity for 1W @ 1m
88dB
Impedance nominal 8 ohms
Impedance minimum 6.0 ohms
Crossover frequencies 5.0kHz
Power handling 15 - 125 watts into 8 ohms unclipped
Harmonic distortion
<1% 100Hz – 20kHz 90 dB @ 1m
Connections
2/3 way gold plated bi-wirable terminals
Magnetic shielding All drive units completely screened
Dimensions H x W x D 309 x 311 x 176mm (12.1 x 12.2 x 6.9in)
Plinth maximum W x D -
Spikes/feet/stand height -
Net weight 5.8kg (12.8lb)
Shipping weight 6.9kg (15.2lb)
Accessories supplied Stainless steel wall bracket and fixings
Cabinet real wood veneer finishes Cherry, Maple, Rosenut, Black Ash
Spendor products are designed and manufactured in the UK by Spendor Audio Systems Ltd
Spendor Audio Systems Ltd reserve the right to alter designs and specifications without notice
Spendor is a registered trademark of Spendor Audio Systems Ltd. Kevlar is a registered trademark of DuPont.
© Copyright 2003 Spendor Audio Systems Ltd. All rights reserved.
Compare with other 'S' Series models Return to 'S' series
audiophile62
AVClub Enthusiast
SR5
2 way on-wall stereo/surround loudspeaker
Sealed enclosure
The Spendor SR5 is designed for on-wall installation. The slim cabinet is profiled and dimensioned to integrate with a specially developed Spendor 140mm bass-midrange drive unit. The driver has a large powerful motor-magnet system and very low Qe. As a result the SR5 has an optimally flat and correctly damped frequency response. The response is also exceptionally smooth and well-maintained off-axis, very important for surround sound applications especially when the loudspeakers are not at ear height. The SR5 creates a wide deep sound field that allows great flexibility when planning the layout of rooms and seating.
Each SR5 is supplied with an adjustable stainless steel bracket. To guarantee consistent sound the bracket incorporates two non-resonant polymer damping rings to control the flow of energy from the cabinet to the wall. The Spendor SR5 is ideal for 2, 5 or 7 channel loudspeaker systems and a diversity of high performance multi-room and multimedia applications. It is the perfect surround loudspeaker for combination with other Spendor 'S' series loudspeakers.
View Specification
See review list
Download manual (PDF 274kB)
Download brochure (PDF 1230kB)
2 way on-wall stereo/surround loudspeaker
Sealed enclosure
The Spendor SR5 is designed for on-wall installation. The slim cabinet is profiled and dimensioned to integrate with a specially developed Spendor 140mm bass-midrange drive unit. The driver has a large powerful motor-magnet system and very low Qe. As a result the SR5 has an optimally flat and correctly damped frequency response. The response is also exceptionally smooth and well-maintained off-axis, very important for surround sound applications especially when the loudspeakers are not at ear height. The SR5 creates a wide deep sound field that allows great flexibility when planning the layout of rooms and seating.
Each SR5 is supplied with an adjustable stainless steel bracket. To guarantee consistent sound the bracket incorporates two non-resonant polymer damping rings to control the flow of energy from the cabinet to the wall. The Spendor SR5 is ideal for 2, 5 or 7 channel loudspeaker systems and a diversity of high performance multi-room and multimedia applications. It is the perfect surround loudspeaker for combination with other Spendor 'S' series loudspeakers.
View Specification
See review list
Download manual (PDF 274kB)
Download brochure (PDF 1230kB)