AZBox Elite/Premium, part II
- Thread starter AlexT_
- Start date
thmls
Established Member
γεια σας παιδια μια βοηθεια με ποιο προγραμμα ριχνουμε settings στον azbox hd e2 openpil και συγκεκριμενο τα settings απο την παρακατω σελιδα http://www.vhannibal.net/
Καλημέρα
Γνωρίζεις κανείς για ποιο λόγο στο Original FW(5309), τα AVI αρχεία μεγαλύτερα από 2 GB δεν μπορεί να τα παίξει ολόκληρα; Δηλαδή, εαν η ταινία είναι 2 ώρες παίζει μόνο1:30 ώρα. Σε E2 παιζούν μια χαρά.
Γνωρίζεις κανείς για ποιο λόγο στο Original FW(5309), τα AVI αρχεία μεγαλύτερα από 2 GB δεν μπορεί να τα παίξει ολόκληρα; Δηλαδή, εαν η ταινία είναι 2 ώρες παίζει μόνο1:30 ώρα. Σε E2 παιζούν μια χαρά.
tsakman
Senior Member
Σύντομα? νέο firmware Enigma 2 με kernel 3.3.1
Κernel boot
Κernel boot
**********************************
* YAMON ROM Monitor
* Revision 02.06-SIGMADESIGNS-01-2.8.0.1
**********************************
Memory: code: 0x11000000-0x11040000, 0x11200000-0x11204000
reserved data: 0x11240000-0x12440000, PCI memory: 0x12440000-0x12840000
Environment variable 'start' exists. After 1 seconds
it will be interpreted as a YAMON command and executed.
Press Ctrl-C (or do BREAK) to bypass this.
ROMFS found at 0xac080000, Volume name = MIPS_LINUX_XRPC
ac080040 : Name = ., Type = dir, Size = 00000000, Next = 00000040
ac080060 : Name = .., Type = hard link, Size = 00000000, Next = 00000060
ac080090 : Name = vmlinux_xload.zbf, Type = file, Size = 0067bc3b, Next = 00000000
Checking zboot signature.. it's a zboot file, signature OK.
Decompressing to 0x90020000 ..
Output length: 0x00fa93ac(16421804)
load compressed zboot file from 0xac080090 to 0x90020000 OK
[ 0.000000] Linux version 3.3.1 (root@ubuntu) (gcc version 4.5.2 (Sourcery CodeBench Lite 2011.09-75) ) #91 PREEMPT Tue Jun 12 22:31:29 CEST 2012
<4>[ 0.000000] Configured for SMP863x (revision ES6+/RevA+), detected SMP8634 (revision ES9/RevC).
<4>[ 0.000000] Detected CPU/System/DSP Frequencies: 300.37/200.25/300.37MHz
[ 0.000000] Configured for SMP863x (revision ES6+/RevA+), detected SMP8634 (revision ES9/RevC).
<4>[ 0.000000] Detected CPU/System/DSP Frequencies: 300.37/200.25/300.37MHz
[ 0.000000] Detected CPU/System/DSP Frequencies: 300.37/200.25/300.37MHz
[ 0.000000] bootconsole [prom0] enabled
[ 0.000000] prom console registered
[ 0.000000] SMP86xx Enabled Devices under Linux/XENV 0x48000000 = 0x00021ace
[ 0.000000] BM/IDE PCIHost Ethernet I2CM I2CS USB PCIDev2 PCIDev3 SCARD
[ 0.000000] Valid MEMCFG found at 0x10000fc0.
[ 0.000000] CPU revision is: 00019069 (MIPS 4KEc)
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 0f4e0000 @ 10020000 (usable)
[ 0.000000] parsing kernel command line for memory options ..
[ 0.000000] Valid MEMCFG found at 0x10000fc0.
[ 0.000000] User-defined physical RAM map:
[ 0.000000] memory: 06be0000 @ 10020000 (usable)
[ 0.000000] Wasting 2098176 bytes for tracking 65568 unused pages
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00010020 -> 0x00020000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00010020 -> 0x00016c00
[ 0.000000] On node 0 totalpages: 27616
[ 0.000000] free_area_init_node: node 0, pgdat 90571730, node_mem_map 90ff0400
[ 0.000000] DMA zone: 216 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 27400 pages, LIFO batch:7
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 27400
[ 0.000000] Kernel command line: mem=108m console=ttyS0,115200
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Primary instruction cache 16kB, 2-way, VIPT, linesize 16 bytes.
[ 0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 93276k/110464k available (4220k kernel code, 17188k reserved, 1235k data, 10584k init, 0k highmem)
[ 0.000000] NR_IRQS:256
[ 0.000000] console [ttyS0] enabled, bootconsole disabled
[ 0.000000] console [ttyS0] enabled, bootconsole disabled
[ 0.010000] Calibrating delay loop... 299.82 BogoMIPS (lpj=1499136)
[ 0.090000] pid_max: default: 32768 minimum: 301
[ 0.090000] Mount-cache hash table entries: 512
[ 0.110000] NET: Registered protocol family 16
[ 0.120000] tangox: creating CPU mapping for 0x20000000 at 0x08000000, size 0x08000000.
[ 0.120000] PCI: Initializing SMP8xxx PCI host controller
[ 0.130000] PCI: Remapped PCI I/O space 0x58000000 to 0xc0000000, size 64 kB
[ 0.130000] PCI: Remapped PCI config space 0x50000000 to 0xc0014000, size 10 kB
[ 0.140000] PCI: device 1 disabled
[ 0.140000] PCI: device 4 disabled
[ 0.140000] PCI: Configured SMP8xxx as PCI slave with 128MB PCI memory
[ 0.150000] PCI: Region size is 16384KB
[ 0.150000] PCI: Map DMA memory 0x10020000-0x16c00000 for PCI at 0x11000000
[ 0.170000] bio: create slab <bio-0> at 0
[ 0.180000] SCSI subsystem initialized
[ 0.180000] usbcore: registered new interface driver usbfs
[ 0.190000] usbcore: registered new interface driver hub
[ 0.190000] usbcore: registered new device driver usb
[ 0.200000] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.200000] PCI host bridge to bus 0000:00
[ 0.210000] pci_bus 0000:00: root bus resource [mem 0x62000000-0x7fffffff]
[ 0.210000] pci_bus 0000:00: root bus resource [io 0x58000000-0x5800ffff]
[ 0.220000] pci 0000:00:02.0: [1106:3038] type 0 class 0x000c03
[ 0.220000] pci 0000:00:02.0: reg 20: [io 0xfce0-0xfcff]
[ 0.230000] pci 0000:00:02.0: supports D1 D2
[ 0.230000] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.240000] pci 0000:00:02.1: [1106:3038] type 0 class 0x000c03
[ 0.240000] pci 0000:00:02.1: reg 20: [io 0xfce0-0xfcff]
[ 0.250000] pci 0000:00:02.1: supports D1 D2
[ 0.250000] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.260000] pci 0000:00:02.2: [1106:3104] type 0 class 0x000c03
[ 0.260000] pci 0000:00:02.2: reg 10: [mem 0x00000000-0x000000ff]
[ 0.270000] pci 0000:00:02.2: supports D1 D2
[ 0.270000] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.280000] pci 0000:00:02.2: BAR 0: assigned [mem 0x62000000-0x620000ff]
[ 0.280000] pci 0000:00:02.0: BAR 4: assigned [io 0x58000000-0x5800001f]
[ 0.290000] pci 0000:00:02.1: BAR 4: assigned [io 0x58000020-0x5800003f]
[ 0.290000] Switching to clocksource TANGOX
[ 0.300000] cfg80211: Calling CRDA to update world regulatory domain
[ 0.300000] NET: Registered protocol family 2
[ 0.310000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.310000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.320000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.330000] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.330000] TCP reno registered
[ 0.340000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.340000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.350000] NET: Registered protocol family 1
[ 0.350000] PCI: Enabling device 0000:00:02.0 (0000 -> 0001)
[ 0.360000] PCI: Enabling device 0000:00:02.1 (0000 -> 0001)
[ 0.370000] PCI: Enabling device 0000:00:02.2 (0000 -> 0002)
[ 0.370000] PCI: CLS 0 bytes, default 16
[ 0.800000] timer0: interrupt registered.
[ 0.810000] Created /proc/cpucache_info entry.
[ 0.810000] registering mbus interrupt routines.
[ 0.820000] NTFS driver 2.1.30 [Flags: R/W].
[ 0.830000] fuse init (API version 7.18)
[ 0.830000] msgmni has been set to 182
[ 0.850000] alg: No test for stdrng (krng)
[ 0.850000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.860000] io scheduler noop registered
[ 0.860000] io scheduler deadline registered
[ 0.870000] io scheduler cfq registered (default)
[ 0.990000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 1.000000] serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
[ 1.020000] loop: module loaded
[ 1.020000] Uniform Multi-Platform E-IDE driver
[ 1.030000] ide-gd driver 1.18
[ 1.030000] TANGO2 Bus Mastering IDE interface (base 0xa00223c0,ctl 0xa0022398,irq 26)
[ 1.040000] Probing IDE interface ide0...
* YAMON ROM Monitor
* Revision 02.06-SIGMADESIGNS-01-2.8.0.1
**********************************
Memory: code: 0x11000000-0x11040000, 0x11200000-0x11204000
reserved data: 0x11240000-0x12440000, PCI memory: 0x12440000-0x12840000
Environment variable 'start' exists. After 1 seconds
it will be interpreted as a YAMON command and executed.
Press Ctrl-C (or do BREAK) to bypass this.
ROMFS found at 0xac080000, Volume name = MIPS_LINUX_XRPC
ac080040 : Name = ., Type = dir, Size = 00000000, Next = 00000040
ac080060 : Name = .., Type = hard link, Size = 00000000, Next = 00000060
ac080090 : Name = vmlinux_xload.zbf, Type = file, Size = 0067bc3b, Next = 00000000
Checking zboot signature.. it's a zboot file, signature OK.
Decompressing to 0x90020000 ..
Output length: 0x00fa93ac(16421804)
load compressed zboot file from 0xac080090 to 0x90020000 OK
[ 0.000000] Linux version 3.3.1 (root@ubuntu) (gcc version 4.5.2 (Sourcery CodeBench Lite 2011.09-75) ) #91 PREEMPT Tue Jun 12 22:31:29 CEST 2012
<4>[ 0.000000] Configured for SMP863x (revision ES6+/RevA+), detected SMP8634 (revision ES9/RevC).
<4>[ 0.000000] Detected CPU/System/DSP Frequencies: 300.37/200.25/300.37MHz
[ 0.000000] Configured for SMP863x (revision ES6+/RevA+), detected SMP8634 (revision ES9/RevC).
<4>[ 0.000000] Detected CPU/System/DSP Frequencies: 300.37/200.25/300.37MHz
[ 0.000000] Detected CPU/System/DSP Frequencies: 300.37/200.25/300.37MHz
[ 0.000000] bootconsole [prom0] enabled
[ 0.000000] prom console registered
[ 0.000000] SMP86xx Enabled Devices under Linux/XENV 0x48000000 = 0x00021ace
[ 0.000000] BM/IDE PCIHost Ethernet I2CM I2CS USB PCIDev2 PCIDev3 SCARD
[ 0.000000] Valid MEMCFG found at 0x10000fc0.
[ 0.000000] CPU revision is: 00019069 (MIPS 4KEc)
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 0f4e0000 @ 10020000 (usable)
[ 0.000000] parsing kernel command line for memory options ..
[ 0.000000] Valid MEMCFG found at 0x10000fc0.
[ 0.000000] User-defined physical RAM map:
[ 0.000000] memory: 06be0000 @ 10020000 (usable)
[ 0.000000] Wasting 2098176 bytes for tracking 65568 unused pages
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00010020 -> 0x00020000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00010020 -> 0x00016c00
[ 0.000000] On node 0 totalpages: 27616
[ 0.000000] free_area_init_node: node 0, pgdat 90571730, node_mem_map 90ff0400
[ 0.000000] DMA zone: 216 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 27400 pages, LIFO batch:7
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 27400
[ 0.000000] Kernel command line: mem=108m console=ttyS0,115200
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Primary instruction cache 16kB, 2-way, VIPT, linesize 16 bytes.
[ 0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 93276k/110464k available (4220k kernel code, 17188k reserved, 1235k data, 10584k init, 0k highmem)
[ 0.000000] NR_IRQS:256
[ 0.000000] console [ttyS0] enabled, bootconsole disabled
[ 0.000000] console [ttyS0] enabled, bootconsole disabled
[ 0.010000] Calibrating delay loop... 299.82 BogoMIPS (lpj=1499136)
[ 0.090000] pid_max: default: 32768 minimum: 301
[ 0.090000] Mount-cache hash table entries: 512
[ 0.110000] NET: Registered protocol family 16
[ 0.120000] tangox: creating CPU mapping for 0x20000000 at 0x08000000, size 0x08000000.
[ 0.120000] PCI: Initializing SMP8xxx PCI host controller
[ 0.130000] PCI: Remapped PCI I/O space 0x58000000 to 0xc0000000, size 64 kB
[ 0.130000] PCI: Remapped PCI config space 0x50000000 to 0xc0014000, size 10 kB
[ 0.140000] PCI: device 1 disabled
[ 0.140000] PCI: device 4 disabled
[ 0.140000] PCI: Configured SMP8xxx as PCI slave with 128MB PCI memory
[ 0.150000] PCI: Region size is 16384KB
[ 0.150000] PCI: Map DMA memory 0x10020000-0x16c00000 for PCI at 0x11000000
[ 0.170000] bio: create slab <bio-0> at 0
[ 0.180000] SCSI subsystem initialized
[ 0.180000] usbcore: registered new interface driver usbfs
[ 0.190000] usbcore: registered new interface driver hub
[ 0.190000] usbcore: registered new device driver usb
[ 0.200000] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.200000] PCI host bridge to bus 0000:00
[ 0.210000] pci_bus 0000:00: root bus resource [mem 0x62000000-0x7fffffff]
[ 0.210000] pci_bus 0000:00: root bus resource [io 0x58000000-0x5800ffff]
[ 0.220000] pci 0000:00:02.0: [1106:3038] type 0 class 0x000c03
[ 0.220000] pci 0000:00:02.0: reg 20: [io 0xfce0-0xfcff]
[ 0.230000] pci 0000:00:02.0: supports D1 D2
[ 0.230000] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.240000] pci 0000:00:02.1: [1106:3038] type 0 class 0x000c03
[ 0.240000] pci 0000:00:02.1: reg 20: [io 0xfce0-0xfcff]
[ 0.250000] pci 0000:00:02.1: supports D1 D2
[ 0.250000] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.260000] pci 0000:00:02.2: [1106:3104] type 0 class 0x000c03
[ 0.260000] pci 0000:00:02.2: reg 10: [mem 0x00000000-0x000000ff]
[ 0.270000] pci 0000:00:02.2: supports D1 D2
[ 0.270000] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.280000] pci 0000:00:02.2: BAR 0: assigned [mem 0x62000000-0x620000ff]
[ 0.280000] pci 0000:00:02.0: BAR 4: assigned [io 0x58000000-0x5800001f]
[ 0.290000] pci 0000:00:02.1: BAR 4: assigned [io 0x58000020-0x5800003f]
[ 0.290000] Switching to clocksource TANGOX
[ 0.300000] cfg80211: Calling CRDA to update world regulatory domain
[ 0.300000] NET: Registered protocol family 2
[ 0.310000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.310000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.320000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.330000] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.330000] TCP reno registered
[ 0.340000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.340000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.350000] NET: Registered protocol family 1
[ 0.350000] PCI: Enabling device 0000:00:02.0 (0000 -> 0001)
[ 0.360000] PCI: Enabling device 0000:00:02.1 (0000 -> 0001)
[ 0.370000] PCI: Enabling device 0000:00:02.2 (0000 -> 0002)
[ 0.370000] PCI: CLS 0 bytes, default 16
[ 0.800000] timer0: interrupt registered.
[ 0.810000] Created /proc/cpucache_info entry.
[ 0.810000] registering mbus interrupt routines.
[ 0.820000] NTFS driver 2.1.30 [Flags: R/W].
[ 0.830000] fuse init (API version 7.18)
[ 0.830000] msgmni has been set to 182
[ 0.850000] alg: No test for stdrng (krng)
[ 0.850000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.860000] io scheduler noop registered
[ 0.860000] io scheduler deadline registered
[ 0.870000] io scheduler cfq registered (default)
[ 0.990000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 1.000000] serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
[ 1.020000] loop: module loaded
[ 1.020000] Uniform Multi-Platform E-IDE driver
[ 1.030000] ide-gd driver 1.18
[ 1.030000] TANGO2 Bus Mastering IDE interface (base 0xa00223c0,ctl 0xa0022398,irq 26)
[ 1.040000] Probing IDE interface ide0...
Θα ηθελα να ρωτήσω αν αξιζει να πειραματιστώ με enigma 2 ή aztrino σε azbox elite, ή να μεινω με original λειτουργικό. Τι θα κερδίσω ? Ευχαριστώ εκ των προτέρων
OK!!! Επίσης κάπου διάβασα για δυνατότητα 2 λειτουργικών στον δέκτη - το enigma σε USB. Επειδή είμαι noob εσυ τι μου προτείνεις φίλε μου να κάνω ?
PS Στο link που μου εδωσες βλεπω image + kernel για azbox HD. Κανένα πρόβλημα με elite ε ?
Last edited:
Επειδή θα ήθελα να προσθέσω ένα 2ο δέκτη στη κρεβατοκάμαρα, έχει νόημα να αγοράσω πάλι azbox ή να κοιτάξω για Dreambox ? Μπορεί να γίνει streaming εικόνας ή κλειδιών απο δέκτη (elite) σε δέκτη premium ?
NICKMAN9271
Senior Member
αυτο που θελεις δεν γινεται ουτε με dreambox , μιλαω για το streaming εικονας .
για τα κλειδακια ειναι μια αλλη ιστορια που περιοριζει ο κανονισμος του φορουμ την συζητηση ...
για τα κλειδακια ειναι μια αλλη ιστορια που περιοριζει ο κανονισμος του φορουμ την συζητηση ...
Απάντηση: Re: AZBox Elite/Premium, part II
καλημερα απο μοιρες.
φιλε μου NICKMAN μια ερωτηση αν ξερεις :
εχω azbox premium με image v 1.6.0 ... αξιζει να βαλω το καινουργιο 1.7.0 και αν ναι ,θα χασω τα plugins που εχω περασει ...οπως υποτιτλους - ή δεν πειραζεται τιποτα εκτος απο το λειτουργικο ?
περιμενω νεα
ευχαριστω.
καλημερα απο μοιρες.
φιλε μου NICKMAN μια ερωτηση αν ξερεις :
εχω azbox premium με image v 1.6.0 ... αξιζει να βαλω το καινουργιο 1.7.0 και αν ναι ,θα χασω τα plugins που εχω περασει ...οπως υποτιτλους - ή δεν πειραζεται τιποτα εκτος απο το λειτουργικο ?
περιμενω νεα
ευχαριστω.
thmls
Established Member
thmls
Established Member
Re: Απάντηση: Re: AZBox Elite/Premium, part II
αν εχεις συνδεση τον azbox σε home cinema στο rti 1.7 δεν δουλευει το dts και το ac3
για τα plugins εγω τα εγκαταστω ξανα οταν κανω αλλαγη image δεν εχω βρει τροπο δηλ. με backup να τα επαναφερω
αν εχεις συνδεση τον azbox σε home cinema στο rti 1.7 δεν δουλευει το dts και το ac3
για τα plugins εγω τα εγκαταστω ξανα οταν κανω αλλαγη image δεν εχω βρει τροπο δηλ. με backup να τα επαναφερω
hi guys,
εχω καιρο να ασχοληθω με τον azboxHD αλλα βλεπω οτι η openrsi εχει καθε μερα νεα εκδοση.
ξερω βεβαια οτι γινεται αυτοματα η δημιουργια νεας εκδοσης, αλλα.... εσεις στην πραξη βλεπετε καμμια προοδο?
ειχα δοκιμασει μια απο τις πρωτες εκδοσεις αλλα το dvb-t ειχε παραπολυ αργες εναλλαγες στο zapping.
βασικα ριχνω βαρος , εκτος του δορυφορικου κομματιου, στο επιγειο και στο Media center (greek subs κλπ)
παιζουν ? η να μεινω στο rti 1.7????
eyxaristv
εχω καιρο να ασχοληθω με τον azboxHD αλλα βλεπω οτι η openrsi εχει καθε μερα νεα εκδοση.
ξερω βεβαια οτι γινεται αυτοματα η δημιουργια νεας εκδοσης, αλλα.... εσεις στην πραξη βλεπετε καμμια προοδο?
ειχα δοκιμασει μια απο τις πρωτες εκδοσεις αλλα το dvb-t ειχε παραπολυ αργες εναλλαγες στο zapping.
βασικα ριχνω βαρος , εκτος του δορυφορικου κομματιου, στο επιγειο και στο Media center (greek subs κλπ)
παιζουν ? η να μεινω στο rti 1.7????
eyxaristv
Σ ευχαριστώ φίλε μου, θα ξεκινήσω πειραματισμούς
Να δοκιμάσω να το περάσω μέσω update απο URL ή δεν λειτουργεί αυτός ο τρόπος ?
Τέλος πια έκδοση του Rti δουλευει με ήχο dts σε Home cinema ?
tsakman
Senior Member
Koala azboxhd 06/06/2012
Size: 54,9 MB
Publish date: 16/06/2012 - 15:17
http://www.sifteam.eu/download/get/...team-enigma2-koala-azboxhd-20120606230118.zip
Publish date: 16/06/2012 - 15:17
http://www.sifteam.eu/download/get/...team-enigma2-koala-azboxhd-20120606230118.zip
Δυστυχώς δε βρήκα κάτι περισσότερο