.05b telesat mod 2008/05/21 00:23
Karma: 2 1.05b telesat mod
- AutoDetect HW Version (1w/14w) and automatic setting of cfg files
of the appropriate BOX's version;
- Auto-DiSEqC v.1.0 by telesat® , (DiSEqC 1.1/1.2)
You should edit file : /data/sat/diseqc.cfg
Set up DiSEqC type 1.1 or 1.2 according to the system you have
Syntax is <diseqc_type=1.x> where x=1 or x=2 ,
that means that allowed values are:
diseqc_type=1.1 i diseqc_type=1.2
Set up satellite position
Syntax is: <position> <Satname> , where:
<position> = DiSEqC position stored in
DiSEqC positioner or position stored on DiSEqC multiswitch
values must be between 1 and 99, others are ignored
Position 255 in cfg file means that there won't be sent any command on that satellite
<Satname> = name od the satellite - in the way it is written in the box settings file
check with setdir
- Watchdog for OSDshell added
- Transparent OSD
- Telnet password Add
________________________________________________________________________________________________
1.05a telesat mod
- Hello message changed (the message you get on switching on/off your receiver)
- camd3 added, but you can also add it by yourself in a very simple way
- new options added in advenced menu:
- CAMD List Update' *1)
- ECM Info
- Netmask , Gateway and DNS podesavanja
- Reboot
*1) CAMD List Update
Scripts are standard one used in, for example, Dreambox/Gemini (somename_cam.sh)
Copy scripts in /data.emu/ folder, give them 755 right,
then, through advanced menu choose CAMD MENU => CAMD List Update ,
wait for a second and you will get message with scripts found and add into menu:
CAMD MENU => CAMD Setup and through it you can choose which CAMD it is going to be active
and in the same time you can turn off the existing one and to turn on the new one selected.
If you have choose the same one - it will restart it.
________________________________________________________________________________________________
1.05 telesat mod
IP - 192.168.1.34
FTP - user:root , pass:kathrein
telnet - without password
EMU : Mgcamd , Newcs
- IP adress and other settings from network may be changed from extended meny;
also, you can preview all network settings
- Select active EMU from extended meny. It will restart after sellection,
if you select different EMU - active emu will be stoped and new/selected will be started
- Add new emu with scripts' (/data/emu/emuname_cam.sh) but you must edit file : /data/emu/emuactive
- Extended menu offers basic DiSEqC commands and GoTo (stored) position
- Allowing work with PL-2303 USB-to-Serial Bridge Controller
- Channel Info, but at the moment it doesn't work properly - teh reason why Autodiseq is not implemented
http://ufs910.hdtvinfo.eu/component/option,com_remository/func,fileinfo/id,94/
rgs,
