Νεος Media player Mede8er MED500X
- Thread starter geovra
- Start date
- Status
Αξιολογο player με πολυ καλη ποιοτητα κατασκευης και το πιο ομορφο ισως gui σε realtek player.
Απο υποστηριξη αρχειων/ευκολιων δεν προσφερει τοσα πολλα οσο το xtreamer που χρησιμοποιει πιο δυνατο/γρηγορο τσιπακι και εχει και free wifi antenna.
Σε αυτα τα χρηματα δεν ξερω αν αξιζει τοσο...
Απο υποστηριξη αρχειων/ευκολιων δεν προσφερει τοσα πολλα οσο το xtreamer που χρησιμοποιει πιο δυνατο/γρηγορο τσιπακι και εχει και free wifi antenna.
Σε αυτα τα χρηματα δεν ξερω αν αξιζει τοσο...
alefantos2007
Supreme Member
φιλτατε vadergr και οχι μονο... μιας και εθιξες το θεμα του gui ποιες συσκευες πιστευεις /ετε εχουν καλυτερο (εμφανισιακα/λειτουργικα) gui απτο medeter??
Kαι του wd live καλο ειναι.
Δεν αναφερω καν το update gui που θα εχουν απο εδω και μπρος c200/a200/popbox...
Και τα υπολοιπα μια χαρα gui εχουν , το θεμα ειναι ομως η ουσια...
apotheker
New member
- 18 December 2006
- 72
Re: Απάντηση: Νεος Media player Mede8er MED500X
Καλησπερα,ως κατοχος του mede8er στο συστηνω ανεπιφυλακτα,πολυ καλη εικονα,εχει καλη υποστηριξη,πολυ καλη ποιοτητα κατασκευης,μικρο μεγεθος,ολες οι συνδεσεις που χρειαζεσαι υπαρχουν.
alambi
Established Member
Re: Απάντηση: Νεος Media player Mede8er MED500X
+1, και εγώ σαν χρήστης 1 μηνα, με εξαιρετική βοήθεια από τον apotheker, ειναι πολυ καλό μηχάνημα, και μην ξεχνάτε ότι εχει πολύ πολύ καλό Ελληνα αντιπρόσωπο.
+1, και εγώ σαν χρήστης 1 μηνα, με εξαιρετική βοήθεια από τον apotheker, ειναι πολυ καλό μηχάνημα, και μην ξεχνάτε ότι εχει πολύ πολύ καλό Ελληνα αντιπρόσωπο.
alambi
Established Member
Εάν θέλετε καλά νέα .......... Τότε θα υπάρχει πολύ σύντομα η νέα αναβάθμηση του λογισμικού σε version 3.0 !!!!!
και για να δείτε μερικές επερχόμενες αλλαγές στο μενου (GUI) ρήξτε μιά ματιά στις φωτο που ακολουθούν.....
Καλή υπομονή ...
Αυτά λένε ότι θα έχει σαν βελτιώσεις/αλλαγές:
Here are a few of the added features our Mede8ers can look forward to:
* BD ISO and BDMV chapter support
* Folder lock
* Watched movie indicator
* Hard drive spindown
* New skin
* Many fixes...
και θα είναι έτοιμο γύρω στις 10 - 15 Απριλίου......
και για να δείτε μερικές επερχόμενες αλλαγές στο μενου (GUI) ρήξτε μιά ματιά στις φωτο που ακολουθούν.....
Καλή υπομονή ...
Αυτά λένε ότι θα έχει σαν βελτιώσεις/αλλαγές:
Here are a few of the added features our Mede8ers can look forward to:
* BD ISO and BDMV chapter support
* Folder lock
* Watched movie indicator
* Hard drive spindown
* New skin
* Many fixes...
και θα είναι έτοιμο γύρω στις 10 - 15 Απριλίου......
alambi
Established Member
lesarros
AVClub Addicted Member
Δόθηκε πριν από λίγο η V3.0-beta1 έκδοση firmware στους beta testers. Σαν 1η εντύπωση τα προβλήματα ομαλής κίνησης με ορισμένα αρχεία 23.976 διορθώθηκαν,επιτέλους!
Περισσότερα αύριο που θα έχω πολύ χρόνο να την τεστάρω...
Περισσότερα αύριο που θα έχω πολύ χρόνο να την τεστάρω...
lesarros
AVClub Addicted Member
Σχετικά με το hd audio εξαρτάται από τις διαθέσεις της realtek,αν θα γίνει ή όχι.Φαίνεται να έχει σκαλώσει το θέμα πάντως.
Επειδή όμως κάτι κατάφεραν οι προγραμματιστές της divico πρόσφατα για τα tvix,ίσως να το δούμε και στο mede8er στο εγγύς μέλλον!
Επειδή όμως κάτι κατάφεραν οι προγραμματιστές της divico πρόσφατα για τα tvix,ίσως να το δούμε και στο mede8er στο εγγύς μέλλον!
alambi
Established Member
Επιτέλους .... Εφθασε ......
Mede8er MED500X Firmware V3.0 - 1 June 2010 [LATEST]
Please find links for the Mede8er MED500X v3.0 Firmware below.
USE THE EMERGENCY INSTALLATION PROCEDURE ONLY
http://www.mede8er.org/beta/Firmware_Final/Mede8er_V3__1_JUNE_2010.rar
OR
http://www.mede8er.org/beta/Firmware_Final/Mede8er_V3__1_JUNE_2010.zip
Emergency Installation Procedure
- Download the latest Firmware from the Mede8er website;
- Unzip the file i.e. install.img;
- Copy this file to the root directory of a Flash Drive;
- Plug the flash drive into the Mede8er;
- Disconnect the power jack at the rear of the Mede8er then plug it back in;
- Now press the on/off button and keep it pressed in for 10 seconds and then release;
- The LED on the from fascia of the Mede8er with flash red-blue;
- You will get a progress bar on your TV display (some TV's will not display this);
- Wait until the Mede8er re boots itself +/- 90 sec;
- Your Mede8er is now be updated;
- Re-boot once by pulling power and use as normal;
xxxx WARNING - DO NOT REMOVE POWER DURING THE UPDATE PROCESS xxxxx
NOTE: Once you update to V3 you cannot easily go back to older versions if you are using an internal Hard Drive that was formatted with the Mede8er due to a core code (SDK) upgrade. The update process will not damage your Hard Drive contents but the Hard Drive will then be shown as HDD1 instead of C. If you are not using an internal Hard Drive than you can roll back to a earlier version without any problems
A) Do not update the Mede8er from the built-in update facility on the Setup screen;
B) If you experience Samba network connection problems we suggest you perform a "Restore Default" in setup Menu and re-boot the Mede8er.
C) After the Firmware is installed please re-boot the Mede8er – Unplug DC Jack and then re-plug;
D) Do not do a Firmware Restore to update your Mede8er settings across versions - rather input settings manually;
E) Important: Set your TV Resolution on the Main Setup Menu – Video System - for the first time after firmware update.
________________________________________
Mede8er Change Log V3.0 -- 1 June 2010
1. Added: Updated SDK
2. Added: BDISO and BDMV chapter support (No Menus)
3. Added: Icon based screens -- Menu - Goto - Subtitle
4. Added: Lock feature for Folder / Delete / File Manager/ HDD Format protection (Default password: 0000)
5. Added: Pin Protection on/off setting Setup Menu
6. Added: Folder Protection on/off setting Setup Menu
7. Added: Watched Indicator on/off setting Setup Menu
8. Added: Watched movie status indicator
9. Added: "A-B" button provides about.jpg in-folder zoom functionality (same as "SLOW")
10. Added: Play video directly from in-folder about.jpg preview (press "ENTER" or ">" to play movie)
11. Added: Play video file folder -- Play button
12. Added: Browse cover art "about.jpg" up/down nav
13. Added: Video Screen Transparency -- Setup Menu
14 Added: File or Folder rename -- Pre-populate text window
15 Added: Change System Font -- Automatically picks up font.ttf on boot up.
-- Place font.ttf in folder called "Resource" on HDD or USB or SD Card on root
16 Improved: GUI updated
17. Improved: Media Library Menu now remembers last state when returning
18. Improved: File Manager on-screen prompts
19. Improved: Screen size configuration in Setup menu determines about.jpg display area
20. Improved: Filter about.jpg and folder.jpg under “All” tab
21. Improved: SAMBA stability & performance for streaming & network copy
22. Improved: NAS startup after reboot
23. Improved: Music player
24. Improved: Language issues
25. Improved: Navigation of video files in the Media Library with preview "on"
26. Fixed: "Autoplay" from HDD or USB or SD CARD -- removed stop & start icons during autoplay
27. Fixed: Issues related to no internal HDD / no Mede8er-formatted HDD
28. Fixed: HDD format issues
29. Fixed: Mirrored MP3 tags issue
30. Fixed: DVD eject
31. Changed: In-folder JPG permitted display size increased to 5MB
32. Changed: Plasma Mode now only adjusts GUI transparency and not Screens during Video Play
Known issues:
o Network (SMB) write not available to Non-Mede8er-formatted HDD (NTFS-only) -- Under investigation
o DVD resume on VIDEO_TS structure - Not working -- SDK
o Repeat A-B on BDISO -- SDK
o AAC 6 channel passthrough - only stereo -- SDK related
o Restore from v1.x or v2.x backups -- not restoring all fields correctly
o On certain 16:9 DVD menus - selection highlight is misplaced -- SDK issue
o Simultaneous audio output via both HDMI and SPDIF -- SDK restriction
o Extension .divx unsupported -- SDK - temp fix rename file to .avi
o Resume dialogue DVDISO -- SDK
o Resume play DVD VIDEO_TS -- SDK
o File format: .ogg unsupported -- SDK
Mede8er MED500X Firmware V3.0 - 1 June 2010 [LATEST]
Please find links for the Mede8er MED500X v3.0 Firmware below.
USE THE EMERGENCY INSTALLATION PROCEDURE ONLY
http://www.mede8er.org/beta/Firmware_Final/Mede8er_V3__1_JUNE_2010.rar
OR
http://www.mede8er.org/beta/Firmware_Final/Mede8er_V3__1_JUNE_2010.zip
Emergency Installation Procedure
- Download the latest Firmware from the Mede8er website;
- Unzip the file i.e. install.img;
- Copy this file to the root directory of a Flash Drive;
- Plug the flash drive into the Mede8er;
- Disconnect the power jack at the rear of the Mede8er then plug it back in;
- Now press the on/off button and keep it pressed in for 10 seconds and then release;
- The LED on the from fascia of the Mede8er with flash red-blue;
- You will get a progress bar on your TV display (some TV's will not display this);
- Wait until the Mede8er re boots itself +/- 90 sec;
- Your Mede8er is now be updated;
- Re-boot once by pulling power and use as normal;
xxxx WARNING - DO NOT REMOVE POWER DURING THE UPDATE PROCESS xxxxx
NOTE: Once you update to V3 you cannot easily go back to older versions if you are using an internal Hard Drive that was formatted with the Mede8er due to a core code (SDK) upgrade. The update process will not damage your Hard Drive contents but the Hard Drive will then be shown as HDD1 instead of C. If you are not using an internal Hard Drive than you can roll back to a earlier version without any problems
A) Do not update the Mede8er from the built-in update facility on the Setup screen;
B) If you experience Samba network connection problems we suggest you perform a "Restore Default" in setup Menu and re-boot the Mede8er.
C) After the Firmware is installed please re-boot the Mede8er – Unplug DC Jack and then re-plug;
D) Do not do a Firmware Restore to update your Mede8er settings across versions - rather input settings manually;
E) Important: Set your TV Resolution on the Main Setup Menu – Video System - for the first time after firmware update.
________________________________________
Mede8er Change Log V3.0 -- 1 June 2010
1. Added: Updated SDK
2. Added: BDISO and BDMV chapter support (No Menus)
3. Added: Icon based screens -- Menu - Goto - Subtitle
4. Added: Lock feature for Folder / Delete / File Manager/ HDD Format protection (Default password: 0000)
5. Added: Pin Protection on/off setting Setup Menu
6. Added: Folder Protection on/off setting Setup Menu
7. Added: Watched Indicator on/off setting Setup Menu
8. Added: Watched movie status indicator
9. Added: "A-B" button provides about.jpg in-folder zoom functionality (same as "SLOW")
10. Added: Play video directly from in-folder about.jpg preview (press "ENTER" or ">" to play movie)
11. Added: Play video file folder -- Play button
12. Added: Browse cover art "about.jpg" up/down nav
13. Added: Video Screen Transparency -- Setup Menu
14 Added: File or Folder rename -- Pre-populate text window
15 Added: Change System Font -- Automatically picks up font.ttf on boot up.
-- Place font.ttf in folder called "Resource" on HDD or USB or SD Card on root
16 Improved: GUI updated
17. Improved: Media Library Menu now remembers last state when returning
18. Improved: File Manager on-screen prompts
19. Improved: Screen size configuration in Setup menu determines about.jpg display area
20. Improved: Filter about.jpg and folder.jpg under “All” tab
21. Improved: SAMBA stability & performance for streaming & network copy
22. Improved: NAS startup after reboot
23. Improved: Music player
24. Improved: Language issues
25. Improved: Navigation of video files in the Media Library with preview "on"
26. Fixed: "Autoplay" from HDD or USB or SD CARD -- removed stop & start icons during autoplay
27. Fixed: Issues related to no internal HDD / no Mede8er-formatted HDD
28. Fixed: HDD format issues
29. Fixed: Mirrored MP3 tags issue
30. Fixed: DVD eject
31. Changed: In-folder JPG permitted display size increased to 5MB
32. Changed: Plasma Mode now only adjusts GUI transparency and not Screens during Video Play
Known issues:
o Network (SMB) write not available to Non-Mede8er-formatted HDD (NTFS-only) -- Under investigation
o DVD resume on VIDEO_TS structure - Not working -- SDK
o Repeat A-B on BDISO -- SDK
o AAC 6 channel passthrough - only stereo -- SDK related
o Restore from v1.x or v2.x backups -- not restoring all fields correctly
o On certain 16:9 DVD menus - selection highlight is misplaced -- SDK issue
o Simultaneous audio output via both HDMI and SPDIF -- SDK restriction
o Extension .divx unsupported -- SDK - temp fix rename file to .avi
o Resume dialogue DVDISO -- SDK
o Resume play DVD VIDEO_TS -- SDK
o File format: .ogg unsupported -- SDK
Last edited:
lesarros
AVClub Addicted Member
alambi
Established Member
Mede8er MED500X Firmware v3.0.2 - 3 June 2010
http://www.mede8er.org/beta/Firmware_Final/Mede8er_V3.0.2__3_JUNE_2010.zip
USE THE EMERGENCY INSTALLATION PROCEDURE ONLY
Emergency Installation Procedure
- Download the latest Firmware from the Mede8er website;
- Unzip the file i.e. install.img;
- Copy this file to the root directory of a Flash Drive;
- Plug the flash drive into the Mede8er;
- Disconnect the power jack at the rear of the Mede8er then plug it back in;
- Now press the on/off button (on Mede8er unit - not remote) - keep it pressed in for 10 seconds and then release;
- The LED on the front fascia of the Mede8er with flash red-blue;
- You will get a progress bar on your TV display (some TV's will not display this);
- Wait until the Mede8er re boots itself +/- 90 sec;
- Your Mede8er is now updated;
- Re-boot once by pulling power and use as normal;
xxxx WARNING - DO NOT REMOVE POWER DURING THE UPDATE PROCESS xxxxx
Mede8er Change Log v3.0.2 -- 3 June 2010
1. Fixed: ogg audio support
2. Fixed: wma audio support
3. Fixed: aac audio support
4. Fixed: Dolby Digital Plus support
5. Fixed: AAC 6 channel passthrough
6. Fixed: Audio player song total length time update on next song play
7. Fixed: Enable Folder Protection Setup Menu -- Zoom about.jpg and navigate up/down nav to a protected folder and press Play or Enter. Pin code screen appears and now wait about 30 sec and do not enter pin code. Mede8er bombs
8. Fixed: Pin Protection "on" enter File Manager. Don't input code press, return, go to Setup and switch Pin Protection "off", back to File Manager sometimes Mede8er bombs
9. Fixed: Select Movies Tab, the Folder Play function plays previously played video and not the video within the folder selected
10. Fixed: Media Library -- Press any number and then press Setup button - layer beneath partly shows
11. Fixed: 16 x 10 Screen size save
12. Fixed: .divx video files
13. Fixed: Italtian "Formato HDD" change to "Formattazione HDD"
Known issues:
o Under certain filter conditions, time bar artwork punching through SETUP screen -- Under investigation
o .ogg files sometimes not playing off internal HDD -- Under investigation
o Network (SMB) write not available to Non-Mede8er-formatted HDD (NTFS-only) -- Under investigation
o DVD resume on VIDEO_TS structure - Not working -- SDK
o Repeat A-B on BDISO -- SDK
o Restore from v1.x or v2.x backups -- not restoring all fields correctly
o On certain 16:9 DVD menus - selection highlight is misplaced -- SDK issue
o Simultaneous audio output via both HDMI and SPDIF -- SDK restriction
o resume dialogue DVDISO -- SDK
o resume play DVD VIDEO_TS -- SDK
http://www.mede8er.org/beta/Firmware_Final/Mede8er_V3.0.2__3_JUNE_2010.zip
USE THE EMERGENCY INSTALLATION PROCEDURE ONLY
Emergency Installation Procedure
- Download the latest Firmware from the Mede8er website;
- Unzip the file i.e. install.img;
- Copy this file to the root directory of a Flash Drive;
- Plug the flash drive into the Mede8er;
- Disconnect the power jack at the rear of the Mede8er then plug it back in;
- Now press the on/off button (on Mede8er unit - not remote) - keep it pressed in for 10 seconds and then release;
- The LED on the front fascia of the Mede8er with flash red-blue;
- You will get a progress bar on your TV display (some TV's will not display this);
- Wait until the Mede8er re boots itself +/- 90 sec;
- Your Mede8er is now updated;
- Re-boot once by pulling power and use as normal;
xxxx WARNING - DO NOT REMOVE POWER DURING THE UPDATE PROCESS xxxxx
Mede8er Change Log v3.0.2 -- 3 June 2010
1. Fixed: ogg audio support
2. Fixed: wma audio support
3. Fixed: aac audio support
4. Fixed: Dolby Digital Plus support
5. Fixed: AAC 6 channel passthrough
6. Fixed: Audio player song total length time update on next song play
7. Fixed: Enable Folder Protection Setup Menu -- Zoom about.jpg and navigate up/down nav to a protected folder and press Play or Enter. Pin code screen appears and now wait about 30 sec and do not enter pin code. Mede8er bombs
8. Fixed: Pin Protection "on" enter File Manager. Don't input code press, return, go to Setup and switch Pin Protection "off", back to File Manager sometimes Mede8er bombs
9. Fixed: Select Movies Tab, the Folder Play function plays previously played video and not the video within the folder selected
10. Fixed: Media Library -- Press any number and then press Setup button - layer beneath partly shows
11. Fixed: 16 x 10 Screen size save
12. Fixed: .divx video files
13. Fixed: Italtian "Formato HDD" change to "Formattazione HDD"
Known issues:
o Under certain filter conditions, time bar artwork punching through SETUP screen -- Under investigation
o .ogg files sometimes not playing off internal HDD -- Under investigation
o Network (SMB) write not available to Non-Mede8er-formatted HDD (NTFS-only) -- Under investigation
o DVD resume on VIDEO_TS structure - Not working -- SDK
o Repeat A-B on BDISO -- SDK
o Restore from v1.x or v2.x backups -- not restoring all fields correctly
o On certain 16:9 DVD menus - selection highlight is misplaced -- SDK issue
o Simultaneous audio output via both HDMI and SPDIF -- SDK restriction
o resume dialogue DVDISO -- SDK
o resume play DVD VIDEO_TS -- SDK
alambi
Established Member
MED500X Firmware v3.0.4 - 14 June 2010
MED500X Firmware v3.0.4 - 14 June 2010
Please find links for the Mede8er MED500X v3.0.4 Firmware below.
USE THE EMERGENCY INSTALLATION PROCEDURE ONLY
http://www.mede8er.org/beta/Firmware_Final/Mede8er_V3.0.4__14_JUNE_2010.rar
or
http://www.mede8er.org/beta/Firmware_Final/Mede8er_V3.0.4__14_JUNE_2010.zip
Οδηγιες Εγκαταστασης (αρχείο pdf):
http://www.mede8er.org/artwork/temp/v3.0.4_Important%20_Please_Read.pdf
Emergency Installation Procedure
- Download the latest Firmware from the Mede8er website;
- Unzip the file i.e. install.img;
- Copy this file to the root directory of a Flash Drive;
- Plug the flash drive into the Mede8er;
- Disconnect the power jack at the rear of the Mede8er then plug it back in;
- Now press the on/off button (on Mede8er unit - not remote) - keep it pressed in for 10 seconds and then release;
- After +- 15sec the LED on the front fascia of the Mede8er with flash red-blue;
- You will get a progress bar on your TV display (some TV's will not display this);
- Wait until the Mede8er re boots itself +/- 90 sec;
- Your Mede8er is now updated;
- Re-boot once by pulling power and use as normal;
WARNING - DO NOT REMOVE POWER DURING THE UPDATE PROCESS
NOTE: Once you update to V3.0.4 you cannot easily go back to older versions below V2.0.2 if you are using an internal Hard Drive that was formatted with the Mede8er due to a core code (SDK) upgrade. The update process will not damage your Hard Drive contents but the Hard Drive will then be shown as HDD1 instead of C. If you are not using an internal Hard Drive than you can roll back to a earlier version without any problems
A) Do not update the Mede8er from the built-in update facility on the Setup screen;
B) If you experience Samba network connection problems we suggest you perform a "Restore Default" in setup Menu and re-boot the Mede8er.
C) After the Firmware is installed please re-boot the Mede8er – Unplug DC Jack and then re-plug;
D) Do not do a Firmware Restore to update your Mede8er settings across versions - rather input settings manually;
E) Important: Set your TV Resolution on the Main Setup Menu – Video System - for the first time after firmware update.
Mede8er Change Log v3.0.4 -- 14 June 2010
14 June 2010 RTD1073-128M-HMC-M03I-20100613-v7.0.7.r4282.QA20100402_SANJIA_ENGLISH_RC18
1. Fixed: Internet Radio. Station list limited by Shoutcast - Require to Use Search for more stations
Do not use “System Restore” feature from a previous Mede8er firmware version
2. Audio info and other info screens changed to larger info screen
3. Russian text Media Library1 for "Hard drive" changed to "Жесткий диск".
4. Improved navigation (smoother) on folders with images inside
5. Fixed: "Pin Protection “"on"" setup Menu -- then go to ""Home Page ""
- select “"File Manager""
- enter “"File Manager""
- exit “"file manager"" with ""return key""
- press ""home key"" ---> mede8er asks you the PSW
6. Fixed: "Folder Protection" set to "on" -- Now must enter pin code to protect folder
7. Fixed: "Folder Protection" "on" Setup menu.
File manager copy to protected folder-- Now does not ask for a pin code when selecting a protected folder
8. Fixed: Music Player cut on some TV's -- Moved up 10 pix
9. Fixed: Cyclic only in one direction -- zOOM about.jpg and now can cycle down or up
10. Updated Internet Time GMT names
GMT + 12 New Zealand (Wellington dst)
GMT + 6 Bangladesh
GMT + 4 Dubai
GMT + 3 Kuwait
GMT +1 Netherlands
GMT -1 Cape Verde (Praia)
GMT -2 Brazil
GMT -3 Argentina (Buenos Aires)
GMT -4 Chile (Santiago dst)
GMT -5 New York
GMT -8 California
Known issues:
o 6 June 2010 - Very high bit rate 29fps BDISO (+- 40GB+) have stuttering and audio loss - Workaround --
to revert to V2.0.2 or extract your BDISO files to BDMV Folder structure with a program such as ISOBUSTER.
If you are using a program like AnyDVD we suggest you save as BDMV and not a ISO
o Under certain filter conditions, time bar artwork punching through SETUP screen -- Under investigation
o Network (SMB) write not available to Non-Mede8er-formatted HDD (NTFS-only) -- Under investigation
o DVD resume on VIDEO_TS structure - Not working -- SDK
o Repeat A-B on BDISO -- SDK
o Restore from v1.x or v2.x backups -- not restoring all fields correctly
o On certain 16:9 DVD menus - selection highlight is misplaced -- SDK issue
o Simultaneous audio output via both HDMI and SPDIF -- SDK restriction
o resume dialogue DVDISO -- SDK
o resume play DVD VIDEO_TS -- SDK
MED500X Firmware v3.0.4 - 14 June 2010
Please find links for the Mede8er MED500X v3.0.4 Firmware below.
USE THE EMERGENCY INSTALLATION PROCEDURE ONLY
http://www.mede8er.org/beta/Firmware_Final/Mede8er_V3.0.4__14_JUNE_2010.rar
or
http://www.mede8er.org/beta/Firmware_Final/Mede8er_V3.0.4__14_JUNE_2010.zip
Οδηγιες Εγκαταστασης (αρχείο pdf):
http://www.mede8er.org/artwork/temp/v3.0.4_Important%20_Please_Read.pdf
Emergency Installation Procedure
- Download the latest Firmware from the Mede8er website;
- Unzip the file i.e. install.img;
- Copy this file to the root directory of a Flash Drive;
- Plug the flash drive into the Mede8er;
- Disconnect the power jack at the rear of the Mede8er then plug it back in;
- Now press the on/off button (on Mede8er unit - not remote) - keep it pressed in for 10 seconds and then release;
- After +- 15sec the LED on the front fascia of the Mede8er with flash red-blue;
- You will get a progress bar on your TV display (some TV's will not display this);
- Wait until the Mede8er re boots itself +/- 90 sec;
- Your Mede8er is now updated;
- Re-boot once by pulling power and use as normal;
WARNING - DO NOT REMOVE POWER DURING THE UPDATE PROCESS
NOTE: Once you update to V3.0.4 you cannot easily go back to older versions below V2.0.2 if you are using an internal Hard Drive that was formatted with the Mede8er due to a core code (SDK) upgrade. The update process will not damage your Hard Drive contents but the Hard Drive will then be shown as HDD1 instead of C. If you are not using an internal Hard Drive than you can roll back to a earlier version without any problems
A) Do not update the Mede8er from the built-in update facility on the Setup screen;
B) If you experience Samba network connection problems we suggest you perform a "Restore Default" in setup Menu and re-boot the Mede8er.
C) After the Firmware is installed please re-boot the Mede8er – Unplug DC Jack and then re-plug;
D) Do not do a Firmware Restore to update your Mede8er settings across versions - rather input settings manually;
E) Important: Set your TV Resolution on the Main Setup Menu – Video System - for the first time after firmware update.
Mede8er Change Log v3.0.4 -- 14 June 2010
14 June 2010 RTD1073-128M-HMC-M03I-20100613-v7.0.7.r4282.QA20100402_SANJIA_ENGLISH_RC18
1. Fixed: Internet Radio. Station list limited by Shoutcast - Require to Use Search for more stations
Do not use “System Restore” feature from a previous Mede8er firmware version
2. Audio info and other info screens changed to larger info screen
3. Russian text Media Library1 for "Hard drive" changed to "Жесткий диск".
4. Improved navigation (smoother) on folders with images inside
5. Fixed: "Pin Protection “"on"" setup Menu -- then go to ""Home Page ""
- select “"File Manager""
- enter “"File Manager""
- exit “"file manager"" with ""return key""
- press ""home key"" ---> mede8er asks you the PSW
6. Fixed: "Folder Protection" set to "on" -- Now must enter pin code to protect folder
7. Fixed: "Folder Protection" "on" Setup menu.
File manager copy to protected folder-- Now does not ask for a pin code when selecting a protected folder
8. Fixed: Music Player cut on some TV's -- Moved up 10 pix
9. Fixed: Cyclic only in one direction -- zOOM about.jpg and now can cycle down or up
10. Updated Internet Time GMT names
GMT + 12 New Zealand (Wellington dst)
GMT + 6 Bangladesh
GMT + 4 Dubai
GMT + 3 Kuwait
GMT +1 Netherlands
GMT -1 Cape Verde (Praia)
GMT -2 Brazil
GMT -3 Argentina (Buenos Aires)
GMT -4 Chile (Santiago dst)
GMT -5 New York
GMT -8 California
Known issues:
o 6 June 2010 - Very high bit rate 29fps BDISO (+- 40GB+) have stuttering and audio loss - Workaround --
to revert to V2.0.2 or extract your BDISO files to BDMV Folder structure with a program such as ISOBUSTER.
If you are using a program like AnyDVD we suggest you save as BDMV and not a ISO
o Under certain filter conditions, time bar artwork punching through SETUP screen -- Under investigation
o Network (SMB) write not available to Non-Mede8er-formatted HDD (NTFS-only) -- Under investigation
o DVD resume on VIDEO_TS structure - Not working -- SDK
o Repeat A-B on BDISO -- SDK
o Restore from v1.x or v2.x backups -- not restoring all fields correctly
o On certain 16:9 DVD menus - selection highlight is misplaced -- SDK issue
o Simultaneous audio output via both HDMI and SPDIF -- SDK restriction
o resume dialogue DVDISO -- SDK
o resume play DVD VIDEO_TS -- SDK
- Status