~ High C / N with a master clock UPCG ~
TAD-D600
Flagship New TAD-D600 Disc Player
Δεκα μηνες μετα την 1η παρουσιαση των monoblock TAD-M600 που ειχαμε δει και απο εδω στα νεα hi-end προιοντα,η TAD παρουσιασε αυτες τις μερες το νεο της μηχανημα.
Το νεο CD/SACD D600...ενα καθοτι φαινεται απο τα χαρακτηριστικα αλλα κυριως και απο την εμφανιση,πραγματικο "θωρηκτο".
Ενα "μηχανακι" που σφυζει απο ποιοτητα/στιβαροτητα(αν λαβουμε υποψη και τα σχολια για/απο τα ενισχυτικα) και απο audiophile υλικα για μουσικη απολαυση χωρις πολλα...πολλα!
Νεοτερα για την ηχητικη του αποδοση ...προσεχως!
[Features]
1) High C / N * 1 master clock with UPCG * 2
For high sound quality, the attention has been to reduce the amount of Total jitter, "TAD-D600" that focuses on quality improvement leads to a reduction in the amount of jitter in the oscillation near the center frequency, ultra high C / N MasterCard UPCG clock developed.
* 1 C / N: Carrier to Noise ratio (Carrier to Noise ratio)
* 2 Ultra High Precision Crystal Generator 2） D/A
parallel differential motion D / A converter with S/N
Made by Burr-Brown D / A converter (192 kHz/24 bit) can be used in parallel connection, S / N ratio, linearity, dynamic range, improved audio performance such as distortion.
This makes possible to play music until the small signal to reproduce the sound, high-density granular.
3) Composition of independent power
Structure and independence that the power supply to eliminate unwanted vibration and leakage flux transformer and adversely affect the audio circuits of the mechanical power achieved the ideal.400 VA
Further enhance the response performance for signal and power transformers for the audio with a 400 VA toroidal transformer has a comparable power amplifier. The enclosure uses the power of a robust cast aluminum Monokokkushashi Damping friendly. 4）
structural rigidity, low center of gravity height
The main part is made of thick cast aluminum base with three point support of 6 mm thick copper-plated steel chassis rigidity of the chassis employs two-tier structure is to achieve a low center of gravity.
This will minimize vibration, and eliminate the adverse effects of mechanical and audio circuitry.
5) New design discrete IV conversion / output circuit with
To pursue the accuracy of the signal, the discrete IV conversion, and has designed a new analog output circuit. S/N （S/N 115 dB）120 V/μs）
High S / N (S / N 115 dB) and the circuit realization of a high response (slew rate 120 V / μs) by the adoption of good sound to play the music rising and small signals.
6) D / A converter as a high performance
The TAD-D600, D / A and high performance as a unit converter (192 kHz 24 bit digital signal input to be compatible). Equipped with a Sample Rate, High C / N master clock by making reclocked, and accurate translation possible.
7) Other features - CD/SACDC/NReliable CD / SACD signals to the reader control board for high C / N adopted the oscillator clock.
- To eliminate the effects of high-frequency noise quality, pressure detection methods adopted without Tatchiki oscillator.
- Adopted the disc tray with aluminum processing.
- CD88.2ｋHzWhen playing a CD can be 88.2kHz sampling frequency, high-quality digital output.(44.1kHz selectable output. SACD playback output is fixed at 44.1kHz.)
- Includes remote
Spec."Audio output(2ch)"
"Output'
1XLR stereo system
"Audio output Level"
Balanced output 450mVrms (1kHz,-20 db)
Unbalanced 220 mVrms (1 kHz,-20 db)
"Frequency"
CD 4Hz 20kHz
SACD 4Hz 40kHz
"S/N ratio"
115 db
"Digital audio input"
"Input sampling"
32kHz 192kHz
"Balanced input"
XLR pin 1 strains(2.Hot)
"Coaxial input"
RCA terminal 1 strains
"Balanced output"
XLR pin 1 strains(2.Hot)
"Power" AC 100 V,50Hz/60Hz 32W
"Dimensions"
450x185x440mm
220x185x430mm
"Weight"
26.5Kg
13.0Kg
(2,625,000yen - 2,500,000yen including tax price)
:afro:
