================================================================== 1.13
= unRAID server Pre-Clear disk /dev/sde
= cycle 1 of 1, partition start on sector 1
= Disk Pre-Clear-Read completed DONE
= Step 1 of 10 - Copying zeros to first 2048k bytes DONE
= Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE
= Step 3 of 10 - Disk is now cleared from MBR onward. DONE
= Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4 DONE
= Step 5 of 10 - Clearing MBR code area DONE
= Step 6 of 10 - Setting MBR signature bytes DONE
= Step 7 of 10 - Setting partition 1 to precleared state DONE
= Step 8 of 10 - Notifying kernel we changed the partitioning DONE
= Step 9 of 10 - Creating the /dev/disk/by* entries DONE
= Step 10 of 10 - Verifying if the MBR is cleared. DONE
= Disk Post-Clear-Read completed DONE
Disk Temperature: 32C, Elapsed Time: 41:21:43
========================================================================1.13
== WDC WD30EZRX-00MMMB0 WD-WCAWZ1783153
== Disk /dev/sde has been successfully precleared
== with a starting sector of 1
============================================================================
** Changed attributes in files: /tmp/smart_start_sde /tmp/smart_finish_sde
ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VA
LUE
Temperature_Celsius = 120 123 0 ok 32
No SMART attributes are FAILING_NOW
0 sectors were pending re-allocation before the start of the preclear.
0 sectors were pending re-allocation after pre-read in cycle 1 of 1.
0 sectors were pending re-allocation after zero of disk in cycle 1 of 1.
0 sectors are pending re-allocation at the end of the preclear,
the number of sectors pending re-allocation did not change.
0 sectors had been re-allocated before the start of the preclear.
0 sectors are re-allocated at the end of the preclear,
the number of sectors re-allocated did not change.
σχετικά με το preclear.
στο forum τους διάβασα ότι πολλοί το τρέχουν 3 συνεχόμενες φορές αντί για μία,
τελικά είναι υπερβολή ή έχει τύχει και σε σας να σας βγάλει προβλήματα ο δίσκος μετά την πρώτη φορά.
Εγώ πρώτη φορά το έκανα (στους δίσκους που ήδη είχα πάνω στον σερβερ - 2 x 1,5 tb - δεν είχα κάνει), οπότε δεν μπορώ να απαντήσω...
η διαφωνία σου είναι στο ότι δεν είναι γρήγορο ή ότι δεν είναι ασφαλές.που πας ρε φίλε το 2012 με reiserfs σαν filesystem
τελικά και πάλι στο αγαπημένο μου linux θα καταλήξω από τι φαίνεται
Δε ξέρουμε ποιο είναι το αγαπημένο σου linux, αλλά θα περιμένουμε παρουσίαση
Αυτό ακριβώς μου συνέβη σε δίσκο που υποψιαζόμουν ότι ήταν προβληματικός (και όντως ήταν). Το πρόγραμμα της WD δεν βρήκε τίποτα ενώ στο preclear χτύπησε:Και αν το preclear σε κάποιο δίσκο εντοπίσει μερικά sectors που έγιναν re-alocated ,αλλά το αντίστοιχο πρόγραμμα της εταιρείας δεν τα δείχνει επειδή είναι λίγα και δεν συνιστούν λόγο για αλλαγή του δίσκου, εμείς τον εμπιστεύομαστε να τον βάλουμε πάνω και να τον χρησιμοποιούμε?