αν κανω απο update με τον παρακατω τροπο λετε να διορθωθει ή εχω πολλες πιθανοτητες να χασω ολα τα δεδομενα στους δισκους;
(εχω κανει back up ενα μερος αυτων αλλα δυστυχως δεν μπορω να τα κανω ολα)
You should look to go to DSM 5.2 5592 first, then apply update 1 and then update 2.
Firstly I BACKED UP everything I wasn't prepared to risk losing.
Then the following steps.
1. I downloaded the XPEnoboot 5.2-5592.2 DS3615xs boot image from http://xpenology.me/downloads/
2. Followed the preparing the new boot image steps in here -> http://idmedia.no/general/installing-or ... 2-or-later (basically edited syslinux.cfg and added in my current serial number and mac address)
3. Burnt the edited boot image to a new USB stick.
4. Booted up the N54L with the new stick inserted and selected the Install/Upgrade boot option (you'll need your N54 plugged into a monitor + keyboard)
5. When the install/upgrade boot had completed then on a PC used synology assistant to locate the NAS and connected to it.
6. Downloaded the 5592 PAT file from http://xpenology.me/downloads/ ( NOT Update 1 or Update 2, we do this later)
7. In the DSM connected to in step 5 select the downloaded PAT file and load it.
8. Sit back and let DSM apply the PAT file.
9. When done, log in to DSM and update any packages indicating they need an update.
10. Manually applied DSM 5592 Release 1 in DSM, using the PAT file from http://xpenology.me/downloads/
11. When applied, rebooted NAS.
12. Logged back into DSM and manually applied 5592 Release 2 using the PAT file from http://xpenology.me/downloads/
That's it.
(εχω κανει back up ενα μερος αυτων αλλα δυστυχως δεν μπορω να τα κανω ολα)
You should look to go to DSM 5.2 5592 first, then apply update 1 and then update 2.
Firstly I BACKED UP everything I wasn't prepared to risk losing.
Then the following steps.
1. I downloaded the XPEnoboot 5.2-5592.2 DS3615xs boot image from http://xpenology.me/downloads/
2. Followed the preparing the new boot image steps in here -> http://idmedia.no/general/installing-or ... 2-or-later (basically edited syslinux.cfg and added in my current serial number and mac address)
3. Burnt the edited boot image to a new USB stick.
4. Booted up the N54L with the new stick inserted and selected the Install/Upgrade boot option (you'll need your N54 plugged into a monitor + keyboard)
5. When the install/upgrade boot had completed then on a PC used synology assistant to locate the NAS and connected to it.
6. Downloaded the 5592 PAT file from http://xpenology.me/downloads/ ( NOT Update 1 or Update 2, we do this later)
7. In the DSM connected to in step 5 select the downloaded PAT file and load it.
8. Sit back and let DSM apply the PAT file.
9. When done, log in to DSM and update any packages indicating they need an update.
10. Manually applied DSM 5592 Release 1 in DSM, using the PAT file from http://xpenology.me/downloads/
11. When applied, rebooted NAS.
12. Logged back into DSM and manually applied 5592 Release 2 using the PAT file from http://xpenology.me/downloads/
That's it.
