iPhone 1.1.2 Update

Γεια σας!Είμαι νέο μέλος και θα ήθελα, σας παρακαλώ, να με βοηθήσετε γιατί προσπαθώ περίπου 1 μηνα(!!!) να ξεκλειδώσω το iphone μου και ακόμη τίποτα. Το πήρα ξεκλειδωμένο 1.0.2 αλλά κατά λάθος έκανα update σε 1.1.1 και κλείδωσε. Έκανα virginate και ενεργοποίηση και τώρα είμαι στη φάση όπου βλέπω κανονικά το menu αλλά βάζω τη sim και δεν δείχνει σήμα. Τώρα έχω 1.0.2 και 04.02.13_G.
Προσπάθησα και με anysim 1.2.1u αλλά τίποτα. Έχω διαβάσει άρθρα και άρθρα αλλά...
Plase, βοηθήστε!
 
Downgrade pros poia ekdosi?kai meta?
Sas parakalo voithiste. Katalevenete oti exo taleporithi toso poli oste akomi kai me kapoio xrimatiko poso tha ithela mia voithia!
 
Ρε παιδιά, συγνώμη και πάλι αλλά απ ό,τι κατάλαβα μάλλον πρέπει να κάνω virginate , μόνο που δεν γίνεται, οπότε μετά δεν μπορώ να πάω σε 1.1.1 όπως λέει το site i.unlock.no . Τώρα έχω 1.0.2 και δεν λέει το baseband. Μπορεί να με βοηθήσει κάποιος ? έχω φτάσει σε απελπιστική κατάσταση, λίγο πριν το πετάξω. Σας παρακαλώ, αν γίνεται ακόμη και με πληρωμή!
Θα χαρώ πολύ αν κάποιος μπορεί να με βοηθήσει..
 
Last edited by a moderator:
Θανάση μην απογοητεύεσαι. Λοιπόν καταρχήν πρέπει να δεις ποιό modem firmware έχεις. Για να το δεις θα πας στα Settings->General->About και θα δείς τι λέει στο modem firmware. Θα πρέπει να έχει μια από τις παρακάτω τιμές (και μάλλον τη 2η). Ανάλογα με το modem firmware ακολουθείς τις παρακάτω οδηγίες για virginize:

03.14.08_G
  1. Set Settings → General → Auto Lock → Never
  2. Start Installer and update it if it asks. Tap on Sources, Edit, and Add http://i.unlock.no/ as a repository.
  3. Make sure you have BSD Subsystem installed, if not, go to System category and install it.
  4. Now, install The Virginizer found in the Unlocking Tools category. This will take about 10 minutes to complete.
04.01.13_G
  1. Set Settings → General → Auto Lock → Never
  2. Install BSD SubSystem found in System Category.
  3. Go to Sources and tap edit and add http://i.unlock.no/ (if you haven't already).
  4. Now install "The Virginizer" found in Unlocking Tools category. This will take almost 10 minutes.
Αν όλα πήγαν καλά μέχρι εδώ, έχεις τελειώσει με το virginize. Τώρα θέλουμε να το φέρουμε σε v.1.1.1. Για να το κάνεις αυτό κατεβάζεις το 1.1.1 firmware από το http://appldnld.apple.com.edgesuite...927.In76t/iPhone1,1_1.1.1_3A109a_Restore.ipsw και ακολουθείς τις παρακάτω οδηγίες για να το περάσεις (πρόσεχε τα bold παρακάτω μην καταλήξεις με 1.1.3!!):

To enter recovery mode, connect the phone to the computer and press and hold the Power button (on top) and the Home button (on bottom front) simultaneously. After about 15 seconds phone will appear to turn off, release the Power button but keep holding the Home button. After about 15 seconds the computer and iTunes will detect the phone in recovery mode, and you can perform a restore.

IMPORTANT: If you just click the restore button, it will restore it with the latest firmware. It's much safer to manually select firmware instead. If you want to manually select a different firmware you can hold down SHIFT key (Windows) or Option/ALT-key (Mac) when clicking the Restore button, and it will let you choose firmware file. Download the wanted firmware here (you would normally want 1.1.1).

Όταν τελειώσεις και με αυτό μένει μόνο το απλό ξεκλείδωμα. Οι οδηγίες είναι οι παρακάτω:

Bypass activation and prepare phone for software installation
  1. Make sure you have a SIM-card with PIN turned off, and power on your phone (the supplied AT&T card works fine).
  2. On the activation screen, slide for emergency and dial: *#301# to make the phone call itself. (If the incoming call dialog quickly disappears but it keeps ringing, just dial 0 (remove *#301# first), and it will call itself)
  3. Answer the call, and tap on Hold
  4. Phone will call it self again, tap Decline. You will now be returned to the normal dialer.
  5. Tap on contacts, and tap the + icon to add a new. The only info you are going to add to this contact are two URL's. To add a URL, tap Add new URL. The first URL is prefs followed by a colon: prefs: and the second is jailbreakme.com. Tap Save.
  6. Your contact now has two "web pages" - tap on the first one (prefs:). This will take you to the settings dialog. The reason you want this, is because you need to connect to a Wi-Fi network, so tap on Wi-Fi, and get connected to a network, and make sure the icon on top of the screen is indicating that you are connected. While you are in the settings dialog, you should also set: General → Auto-Lock → Never.
  7. Now, press the home button, and again, slide for emergency dial 0, Answer the call, Hold and Decline the new call so that you get to the contacts. Tap on your contact (No Name), and this time tap on the other home page, jailbreakme.com
  8. Safari will launch and show you a webpage. Read through the text, before you Install AppSnapp
  9. Phone will return to activation screen, but don't panic, just wait.
  10. Phone should automaticly restart after almost a minute. . If it does not restart withing 2 minutes, click here.
  11. When the phone starts again, it should no longer say slide for emergency, but rather Slide to unlock It means it was successfull! Activation is now bypassed, and phone prepared for software installation! (If you are going to use an AT&T SIM, you won't need to do the next step.)
Unlock the SIM-lock
  1. Open installer, and install the update if prompted.
  2. Go to sources and tap Edit and Add
  3. Add this URL: http://i.unlock.no
  4. Tap Done and then Refresh
  5. Go to Install (at bottom) and scroll down to the Unlocking Tools category and install AnySIM
  6. When installed you can press the home button, and you will find a new AnySIM icon on your home screen. Launch it and follow the instructions.
  7. The unlocking process will take about 5-10 minutes, in the end it should say it was successful!
  8. To clean up your phone, launch Installer and uninstall AnySIM. Then go to Settings → General → Auto-Lock and set it to a prefered value.
Congratulations, you are done!


πηγή: http://iphone.unlock.no
 
Top Bottom