ΠΩΛΗΣΗ Πωλούνται καλώδια Supra & Audioquest σε άψογη κατάσταση

[steadyshot]

Πωλούνται τα παρακάτω καλώδια λόγω αναβάθμισης. Όλα έχουν χρησιμοποιηθεί με μεγάλη προσοχή και βρίσκονται σε άριστη, πλήρως λειτουργική κατάσταση.

Supra LoRad 2.5 SPC 40th Anniversary (1.5m) - 60€
Χειροποίητο καλώδιο ρεύματος, τερματισμένο με γνήσια βύσματα από την Ηχοδομή Χαλανδρίου. Προσφέρει καθαρό και ελεγχόμενο ήχο, με πολύ καλή δυναμική απόδοση στο σύστημα.

Audioquest Red River RCA (1m) - 80€
Χειροποίητο interconnect, επίσης τερματισμένο στην Ηχοδομή Χαλανδρίου με γνήσια βύσματα AudioQuest Red River. Διακρίνεται για τον ισορροπημένο του χαρακτήρα, την καλή ανάλυση και το σωστό timing. Να διευκρινιστεί ότι πρόκειται για την custom έκδοση του καλωδίου με το μέτρο, η οποία εργοστασιακά κατασκευάζεται χωρίς το εξωτερικό braid και ότι έχει χρησιμοποιηθεί η μέθοδος cold weld για την τοποθέτηση των βυσμάτων όπως ορίζει το εγχειρίδιο της Audioquest.

Accessories Bundle (QED Performance Ethernet 3m / Audioquest Pearl Toslink 1.5m) - 30€
Πακέτο με επιπλέον ποιοτικά καλώδια Qed Performance Ethernet Graphite 3m και Audioquest Pearl Toslink 1.5m.

Ειδική Τιμή Πακέτου: Αν αγοραστούν όλα μαζί, η τιμή διαμορφώνεται στα 150€.

Δεδομένης της άψογης κατάστασης όλων, καθώς και της αξίας που έχουν στην αγορά σήμερα (συνολικά 445€), το πακέτο δίνεται στο 1/3 της τιμής λιανικής τους για κάτι που είναι ουσιαστικά και αισθητικά απαράλλακτο από το καινούριο.

Οι φωτογραφίες είναι χθεσινές και δείχνουν την πραγματική κατάσταση των προϊόντων.

 

[steadyshot]

Πωλήθηκε το supra ρεύματος εκτός forum

 

[steadyshot]

Το red river θα κρατηθει. Προστιθεται ενα supra cat 8 ethernet 1m.

Οποτε εχουμε το supra cat 8, το qed ethernet performace 3m και το audioquest pearl toslink 1.5 ολα σε αψογη κατασταση 60 ευρω.Δηλαδή στη μισή τιμή από όσο αγοράστηκαν .

 

[steadyshot]

Επαναφερω το audioquest red river 1m με μειωση στα 70 ευρω, κορυφαιο αναλογικο καλωδιο τιμης λιανικης 250 ευρω για το 1μ , (πωλειται λογω χρησης του dac του ενισχυτη μου με coaxial) καθως και δωρο καλωδιο αναμεσα σε supra cat 8 ethernet 1μ ή qed performance ethernet 3m η toslink audioquest pearl 1.5m ολα σε κατασταση βιτρινας.

https://www.audioquest.com/products/red-river-rca-interconnect-cable?variant=44263070892290

AudioQuest 0.5m Red River RCA > RCA Audio Interconnect Cable - Pair - 1 x Male RCA > 1 x Male RCA​

Connect audio source components to amplifiers and receivers with this AudioQuest Red River RCA analog-audio cable, meticulously designed for exceptional performance and outstanding value. Solid Perfect-Surface Copper+ (PSC+) conductors minimize distortion, Foamed-Polyethylene insulation...
www.audioquest.com

Description
Solid Perfect-Surface Copper (PSC) Conductors
Since the beginning, AudioQuest has pioneered the use of superior metals, yet even we were surprised by the huge leap in performance attained through the astonishingly smooth and pure surface of Perfect-Surface Copper (PSC). Proprietary metal-processing technology protects the wire's surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure, and smooth as possible, it becomes a wonderfully low-distortion conductor. In a conventional cable, electrical and magnetic interaction between strands is one of the greatest sources of distortion, often causing a somewhat harsh, dirty sound. Solid conductors are fundamental toward achieving a very clean, natural sound.
Direction-Controlled Conductors
All drawn metal strands or conductors have a non-symmetrical, and therefore directional, grain structure. AudioQuest controls the resulting RF impedance variation so that noise is drained away from where it will cause distortion. The correct direction is determined by listening to every batch of metal conductors used in every AudioQuest audio cable. When applicable, arrows are clearly marked on the connectors to ensure superior sound quality. For most models of AQ cable, the arrows not only indicate the direction that optimizes metal-directionality as part of Noise-Dissipation, but also indicates non-symmetrical attachment of shield and GND in order to optimize full-system performance. A fundamental aspect of AudioQuest's multifaceted Noise-Dissipation technology, Direction-Controlled Conductors ensure induced noise is dissipated and drained properly.
Metal-Layer Noise-Dissipation
It's easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. Noise-Dissipation "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.
Hard-Cell Foam Insulation
Hard-Cell Foam (HCF) Insulation ensures critical signal-pair geometry. Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Hard-Cell Foam Insulation is similar to the Foamed-PE used in our more affordable Bridges & Falls cables, and is nitrogen-injected to create air pockets. Because nitrogen (like air) does not absorb energy and therefore does not release any energy from or into the conductor, distortion is reduced. In addition, the stiffness of the material allows the cable's conductors to maintain a stable relationship along the cable's full length, producing a stable impedance character and further minimizing distortion.

Triple-Balanced Geometry
Our Triple-Balanced Geometry uses a separate ground-reference conductor, so the cable's shield is never used as an inferior conductor. Whether prepared with RCA or XLR plugs, the cable's three conductors ensure that the positive and negative signals have equally superior, low-distortion conducting paths.

Cold-Welded, Gold-Plated Terminations
This plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.

• Compatible with most receivers and amps: For wide-ranging use.
• Long-grain copper conductors: Reduce distortion. Foamed-polyethylene insulation minimizes timing errors and soundstage smearing.
• Noise-Dissipation system: Uses metal layers to reduce RF and EMI noise before it reaches the equipment ground plane.
• Cold-welded terminations: Utilize pressure to enhance signal quality.
• Triple-balanced design: Ensures positive and negative signals have equally low-distortion conducting paths.
• Enhanced Audio Experience: Red River RCA > RCA delivers high-quality sound for a superior entertainment experience.
• Clear Signal Transmission: Minimizes interference and reduces distortion to deliver clean, clear, naturally beautiful sound.
• High-Quality Materials and Design: High-purity conductor metal, carefully selected insulation, and sophisticated shielding ensure minimal distortion.
• Versatile Connectivity: Ideal for connecting TVs, soundbars, turntables, AV receivers, and more.
• Durable and Reliable Design: Built to withstand everyday use, ensuring consistent performance.

Specifications for product Red River RCA > RCA

Materials & Design
Features & Performance
Manufacturing Details
Metal	Solid Perfect-Surface Copper (PSC)
Geometry	Triple-Balanced
Insulation	Foamed-Polyethylene
Jacket	Red on Black Nylon Braid
Terminations	Gold-Plated
Noise-Dissipation	Metal-Layer
Country of Origin	China
Sold As	Pair