Skybox F3

  • Αγαπητοί φίλοι

    Με ιδιαίτερη χαρά σας προσκαλούμε στην κοπή της πρωτοχρονιάτικης πίτας του AVClub για το 2025

    Την Κυριακή, 16/3/2025 και ώρα 13:30 στο εστιατόριο  "Το Ψαρονέφρι" θα πραγματοποιήσουμε την κοπή της Πρωτοχρονιάτικης πίτας μας για το 2025.

    Το εστιατόριο βρίσκεται στο Μαρούσι, Πέλικα 64, Τηλ.: 210 2824531

    Δηλώστε τη συμμετοχή σας εδώ, θα χαρούμε πολύ να σας δούμε από κοντά.

skyrian1

Established Member
29 August 2007
168
Εντος Ε
Μηπως γνωριζει καποιος με ποιο τροπο θα τον επαναφερω στις εργοστασιακες ρυθμισεις γιατι μετα απο αναβαθμιση δεν συνδεεται με την tv και κανει συνεχει reboot
 

Karmakoma

Established Member
19 February 2007
206
Re: Skybox f3

Πρώτα κατέβασε αυτή την εφαρμογή. Τα υπόλοιπα στην αγγλική:

Connect a Serial RS232 Null Modem Cable to the box and follow the instructions.
Hopefully it will bring your box back to life.

instructions

Download the file:- "Upgrade_PVR800_HD_Tool.zip"
Unzip this file & you have a folder with 5 files:-
eromclient.abs, flashburn.ini, sdram.ini,
LZMA.exe & eromUpgrade.exe & helpfile.txt.

1. Connect up your PC to the Openbox
using a null modem serial cable.
2. Switch the box OFF
3. Run EromUpgrade.exe then check the
com port setting is correct
4. Download the latest firmware .abs file.
5. Select "next" then switch ON the box
and follow the instructions to load
and flash burn the firmware.
6. If the process does not start, try
various time combinations of switching
the box ON after selecting "next"
7. Don't switch the power off or disconnect
while the download & flash is taking place.

If you cannot contact to your box check your null modem cable. Connections are like showen below

pin 2 ...to... pin 3
pin 3 ...to... pin 2
pin 4 ...to... pin 6
pin 5 ...to... pin 5
pin 6 ...to... pin 4
pin 7 ...to... pin 8
pin 8 ...to... pin 7

Important: Go into device manager (goto start-->run-->type "devmgmt.msc" )
or right click MyComputer--->manage--->on the left side u find device manager

and check that you are choosing the right com port. If possible use computer with serial R232 com port built on mainbord.
 

skyrian1

Established Member
29 August 2007
168
Εντος Ε
Προσπαθησα με rs232 καλωδιο με το προγραμμα που μου ειπες αλλα μενει στο reset target χωρις να δειχνει οτι ο δεκτης ανταποκρινεται
Καποια αλλη ιδεα ?

Επεξεργασία:
Τελικα καταφερα και συσδεθηκα αλλα μου γραφει
set sdb memory error
 
Last edited by a moderator:

marine96

New member
23 January 2011
69
Ενδιαφέρομαι για την αγορά του δέκτη Skybox F3 HD. Ο δέκτης είναι να χρησιμοποιηθεί σε κινητό πιάτο 0.90χ1.00 και μελλοντικά σε 1.20μ. Αν κάποιος φίλος έχει δοκιμασει τον δέκτη σε disecq 1.2 ας μου πει τις εντυπώσεις του. Επίσης όποιος φίλος θέλει ας μου στείλει p.m για τα "καλούδια" του δέκτη(emu,keys) και τα σχετικά. Υπάρχει η σκέψη ο δέκτης να αγοραστεί από εδώ:
http://www.aliexpress.com/store/group/Skybox-F3/313543_211532673.html
http://www.tronix.gr/skybox_s66.html
Συμπεράσματα για τον δέκτη έχω βγάλει διαβάζοντας από εδώ:
http://www.satleo.gr/cdn/component/content/article/1-satleo/5598--skybox-f3-hd-linux
http://www.avsite.gr/vb/showthread.php?124960-Skybox-F5-Review-!!!
Bέβαια το τελευταίο link αφορά τον Skybox F5, αλλά επειδή είναι "αδερφάκια" σου δίνει μια σχετική εικόνα και για τον Skybox F3
Ευχαριστώ
 
Last edited by a moderator: