σε συνεχεια μιας συζητησης για το ελληνικο epg στον αζ μπορω να σας πω οτι το plugin του mosrer , getepg δουλευει μια χαρα και στα ελληνικα
Well, here you have the latest version of the plugin to install on any firm since 4890 (KGD or not).
The main novelty of this version is the use of epg.dat file has been replaced load the EPG function for the creation of epg.dat file you need in principle less memory and is faster, after the creation of free file memory and then loads the EPG from the archive, which is very fast, as a result, use less memory, speed of loading is at least 6 times faster, we have generated for the file subsequent charging a startup script in order not to lose the info to reset and loaded into the appropriate field allowing more characters.
Examples approximate speed:
Loading EPG Digital + (140 channels) for 2 days - 45 seconds
Loading EPG Digital + (140 channels) for a week - 1:30 minutes
Loading EPG from Sky Italia (channel 530) for a week - 3:30 minutes.
Besides this, there have been some fixes in the xml (for example, has fixed the bug that did not eliminate the previous xml) and something more on the topic of memory and has been added to getepg the parameter-A EPG convert all charged with capital letters (for those who have vision problems, lol) and the-l parameter to load the files generated epg.dat (when getepg launches and loads the files but if you just want to do load without the whole process, this parameter does).
KGD 4890 Installation on firm
1 - Unzip the contents of the zip file to your hard drive.
2 - Copy files getepg, and getepg.conf DaemonEPG the epg folder to /PLUGINS/PanelKGD/ epg in our Azbox and give 755 permissions and DaemonEPG getepg
3 - Change getepg.conf to everyone's taste
4 - If you have a script in /DISk2/etc/start.d to recharge the old EPG epgdat program, delete it.
5 - Copy the script files into the folder the file start.d have downloaded and unzipped to / DISk2/etc/start.dy give 755 permits
6 - As I suppose you will have the daemon loaded from the menu of the getepg panelKGD or you throw through the crond, to amend the last startup script and remove the line it says./DaemonEPG.
Installation on non-firm KGD> 4890
1 - Unzip the contents of the zip file to your hard drive.
2 - In Azbox generate /PLUGINS a folder called PanelKGD (respecting upper) and within this another call epg
3 - Copy all files from the epg file we downloaded and unzipped to /PLUGINS/PanelKGD/epg (which we created before our Azbox) and give 755 permissions and DaemonEPG getepg
4 - Change getepg.conf to everyone's taste
5 - Copy the script files into the folder the file start.d have downloaded and unzipped to /DISk2/etc/start.dy give 755 permits
6 - Connect via telnet to Azbox and type:
cd /PLUGINS/PanelKGD/epg
./DaemonEPG
./Getepg
The second instruction sets in memory the daemon to load automatically every night and the third loading the epg.
Note: I found that almost always fails in the end when epg.dat file loads into memory but apparently the EPG is loaded with no problems, so do not give him much importance.
Note 2: I modified the tutorial according to these changes.
================================= ============
Changes version 2.1
- Fixed a bug in mediahigway time difference with
- Fixed bug with negative offset values in the getepg.conf
- Now add events in mediahigway 1 retransmissions
- Added support for multiple character sets.
(Files that change are the getepg.conf getepg and the rest remained even though I placed the last epg.equiv and epg.excl published).
As Morser advised me, one must create an XMLTV folder on your USB memory stick, so Rytec EPG has somewhere to go to. So...
1) FileZilla Client -> log into AZbox HD -> DATA -> USB1 [or 2] -> sda1 -> Create Directory [folder] -> XMLTV [where rytec files for EPG will be saved, as opposed to MHW 1 & 2 EPG, which go into the AZbox HD memory]. I give it CHMOD 755.
1a) Similarly, one can Copy&Paste the whole epg folder into AZbox HD -> PLUGINS folder -> PanelKGD [which you need to create by right clicking on PLUGINS folder -> Create Directory etc.], from your HDD.
Just make sure it's CHMOD -> 755, as well as the content of the folder [by right clicking on the folder/file -> Attributes -> 755 -> Save]!
2) If you haven't sufficient signal, like I don't at the moment [lots of leaves on trees in front of my dish], go for rytec EPG, not for MHW...
3) You need SWAP File for your AZbox HD to work properly!
There are 3 possibilities:
-DOM SWAP file [small 16MB or so in original DOMs or 100/200MB in larger capacity DOMs, if you replaced the original one]
-USB SWAP file [100 or 200 MB, using either SWAPON Script or Priority Manager 1.8 by BuyukBang! See the relevant threads for instructions]
-HDD SWAP file [for non-KGD Images use as above or for KGD Images use built-in KGD on-screen function to create it]
4) Morser, even if I go for rytec I still have a lot of green warnings in PuTTy that channels couldn't be found. Is it due to discrepancy in names of channels or something completely different? Can this be fixed, please? Btw, I have a list done with your MaZ, updated from Kingofsat, in all aspects.
συγνωμη για το αγγλικο αλλα ... δεν προλαβαινα να μεταφρασω .
επισης κρινεται απαραιτητη η δημιουργια swap file σε usb stick η σε εσωτερικο hdd αν υπαρχει .
ps : αν κανεται copy - paste τις εντολες για το telnet φροντιστε να μην υπαρχουν spaces σε αυτες .
