O HD33 ειναι DC3 3D :SFGSFGSF: και ο 8300 είναι κυρίως για μεγαλύτερες αίθουσες.
Ειδικά ο HD33 φαντάζει ότι πρεπει! :music-smiley-005:
http://www.projectorreviews.com/blo...el-1080p-3d-home-theater-projector-the-scoop/
http://www.projectorreviews.com/blog/2011/06/16/new-optoma-hd8300-full-hd-3d-home-theater-projector/
Optoma HD33
1800 lumens
4000:1 contrast
3D ready, uses active shutter glasses
3D Compatibility:
120Hz Frame Sequential 3D for Resolutions Up to 720p,
60Hz Field Sequential 3D for Resolutions Up to 480i
HDMI 1.4a (2), Blu-ray 3D compatibility
Roughly 14.2×12.25×4.5 inches
7.7 pounds
1.2:1 zoom
30/28 db noise levels
230 watt lamp
0.65 Darkchip2 DLP
Lamp Life 4000 / 3000 hours
Lens offset is 116%
Optoma HD8300 3D Home Theater Projector:
(based on those blogs)
HD8300 brightness: 1300 lumens – a good start, as 3D projectors need to be brighter than 2D ones due to the significant perceived loss of brightness of 3D projectors (when running 3D).
Contrast: 30,000:1 That should yield some very respectable black level performance
Technology: Single chip DLP Darkchip 3
Processing: 10 bit – 1 Billion colors
3D Glasses: Active shutter (as are all single chip DLP 3D projectors currently out there), they (blogs) say Optoma will have new RF glasses for the projector
Screen compatibility: Does not need a 3D screen (my assumption), no single chip DLP 3D projectors need 3D screens
Ειδικά ο HD33 φαντάζει ότι πρεπει! :music-smiley-005:
http://www.projectorreviews.com/blo...el-1080p-3d-home-theater-projector-the-scoop/
http://www.projectorreviews.com/blog/2011/06/16/new-optoma-hd8300-full-hd-3d-home-theater-projector/
Optoma HD33
1800 lumens
4000:1 contrast
3D ready, uses active shutter glasses
3D Compatibility:
120Hz Frame Sequential 3D for Resolutions Up to 720p,
60Hz Field Sequential 3D for Resolutions Up to 480i
HDMI 1.4a (2), Blu-ray 3D compatibility
Roughly 14.2×12.25×4.5 inches
7.7 pounds
1.2:1 zoom
30/28 db noise levels
230 watt lamp
0.65 Darkchip2 DLP
Lamp Life 4000 / 3000 hours
Lens offset is 116%
Optoma HD8300 3D Home Theater Projector:
(based on those blogs)
HD8300 brightness: 1300 lumens – a good start, as 3D projectors need to be brighter than 2D ones due to the significant perceived loss of brightness of 3D projectors (when running 3D).
Contrast: 30,000:1 That should yield some very respectable black level performance
Technology: Single chip DLP Darkchip 3
Processing: 10 bit – 1 Billion colors
3D Glasses: Active shutter (as are all single chip DLP 3D projectors currently out there), they (blogs) say Optoma will have new RF glasses for the projector
Screen compatibility: Does not need a 3D screen (my assumption), no single chip DLP 3D projectors need 3D screens