Απάντηση: Panasonic TH-42PX80E: Ξανατριπλάρει και ξανασκοράρει!!!
Φίλε chrppgr...για ρίξε μια ματιά στο παρακάτω, πιθανόν να είναι κάτι αντίστοιχο με το πρόβλημα που αντιμετωπίζεις...
http://www.avforums.com/forums/showpost.php?p=6967720&postcount=187
http://www.avforums.com/forums/showpost.php?p=6973589&postcount=195
http://www.avforums.com/forums/showpost.php?p=6990904&postcount=209
Φίλε chrppgr...για ρίξε μια ματιά στο παρακάτω, πιθανόν να είναι κάτι αντίστοιχο με το πρόβλημα που αντιμετωπίζεις...
http://www.avforums.com/forums/showpost.php?p=6967720&postcount=187
..λίγο παρακάτω περιγράφει το πρόβλημα πιο αναλυτικά...It seems the problem with the built-in tuner is linked (very suprisingly) to the HMDI slots!
When I have an hdmi cable (well dvi to hdmi cable) in the back and the TV has been on standby for more than about 3mins the tuner fails to function properly. However as long as the tv is on the tuner works fine, even with the cable in.
No matter what channel was last watched. Only channel ITV in analogue mode and the ITV multiplex in DTV work!
The akward fix is to switch the tv off, pull the cable out and switch the TV back on.
This suggests that the TV is working fine and the source preamp is working fine, but the tuners are not.
Why the tuners are affected by the hdmi cable I do not know, but I need a solution!
any ideas?
http://www.avforums.com/forums/showpost.php?p=6973589&postcount=195
...κάποιος άλλος κάτοχος προτείνει κάποια άλλη λύση...Can you please run test for me:
- Can you set your computer up with the output to the TV.
- Then select the internal tuner to the TV (analogue or digital) and make sure all channels work
- Then switch the TV off.
- Then switch it on after say 3-4 mins to the TV
- Then check to see which tv channels still work
http://www.avforums.com/forums/showpost.php?p=6990904&postcount=209
...αλλά αφού δεν έχεις συνδέσει τίποτα σε θύρα HDMI...δεν ξέρω αν θα σε βοηθήσουν τα παραπάνω...κάνε μια δοκιμή ακολουθώντας τα παραπάνω για τη svhs...π.χ. αν έχεις συνδέσει το lap top στη svhs, να το επαναφέρεις σε single display mode (πριν κλείσεις την TV)...και μετά να το κλείνεις...I have the same problem with the tuner. It is very annoying!
Other solution: switch off the pc (release the hdmi signal...) or desktop right click and go back "single display mode" in vga settings panel - turn off tv - turn on tv - and voila: works everything is fine (no need to pull out the hdmi cable)
Somebody has an idea to the simplier solution?