Για wifi δεν ξερω γιατι δεν εχω, συνδεομαι με καλωδιο μεσω του router. Παντως σιγουρεψου οτι στην εκκινηση του Maz εχεις τη σωστη ΙΡ του δεκτη, αλλιως διορθωσε τη και μετα κανε save.
AZBox Elite/Premium, part II
- Thread starter AlexT_
- Start date
vaggos400
Established Member
καλησπερα παιδια!θα ηθελα να ρωτησω στις ρυθμησης των δοριφορικων εχει διαφορουσ τυπους lnb οπως 1.0 1.1 minilnb κτλπ... εγω ποιο πρεπει να εχω???
vaggos400
Established Member
τοτε αναλογα με τον τυπο του diseqc που εχεις πας diseqc1,0 η diseqc1,1 και επιλεγεις το αναλογο lnb για τον καθε δορυφορο
vaggos400
Established Member
dimitris_gr
New member
Απάντηση: Re: AZBox Elite/Premium, part II
Δεν υπάρχει diseqc 1,2 μπορεί να είναι 2.0
Δεν υπάρχει diseqc 1,2 μπορεί να είναι 2.0
vaggos400
Established Member
Re: Απάντηση: Re: AZBox Elite/Premium, part II
οντως φιλε ειναι diseqc 2, δηλαδη τι πρεπει να βαλω στις ρυθμισεις του lnb ????
οντως φιλε ειναι diseqc 2, δηλαδη τι πρεπει να βαλω στις ρυθμισεις του lnb ????
dimitris_gr
New member
Sory φίλε αλλά δεν θυμάμαι το μενού του απ έξω γιατί στον δικό μου έκανα βλακεία και χτύπησε ο boot loader.Πάντως θα πρέπει να επιλέξεις ρύθμιση για 4 lnb και με την σειρά όπως τα έχεις συνδέσει στο πιάτο.
vaggos400
Established Member
Re: Απάντηση: AZBox Elite/Premium, part II
οκ! thanks! λογικα θα μου πει καποιος αλλος
οκ! thanks! λογικα θα μου πει καποιος αλλος
μετα απο προσπαθεια να περασω το e2 στον azbox elite κανει ο δεκτης reboot και κολαει στο 100 και εκει παραμενει.μπορει καποιος να βοηθησει bonitsa
dimitris_gr
New member
Απάντηση: Re: AZBox Elite/Premium, part II
Οχχχχχχχχ.Φίλε ελπίζω να μην είναι κάτι σοβαρό όπως στον δικό μου,εγώ το παλεύω εδώ και 2 εβδομάδες.Κοίτα στην σελίδα 112 το ποστ του nakata.
Οχχχχχχχχ.Φίλε ελπίζω να μην είναι κάτι σοβαρό όπως στον δικό μου,εγώ το παλεύω εδώ και 2 εβδομάδες.Κοίτα στην σελίδα 112 το ποστ του nakata.
Karmakoma
Established Member
- 19 February 2007
- 206
Εγκατέστησα στο νέο σπίτι τα δορυφορικά. Είναι 2 πιάτα. Στο 1 έχω astra-hotbird και στο δεύτερο eurobird 28,2Ε. Το πρόβλημα είναι ότι ενώ το dreambox τα είδε όλα χωρίς να κάνω κάτι, το azbox αρνείται να δει τον 28,2 ότι συνδυασμό και να βάλω. Τους άλλους 2 τους βλέπει κανονικά.
Για να βοηθήσω έχω 3 quad lnb's και 3 διακόπτες DiSEqC 2.0 για να δίνω σήμα σε 3 δωμάτια με 3 ξεχωριστά καλώδια.
Μήπως μπορεί κανείς να βοηθήσει???
Για να βοηθήσω έχω 3 quad lnb's και 3 διακόπτες DiSEqC 2.0 για να δίνω σήμα σε 3 δωμάτια με 3 ξεχωριστά καλώδια.
Μήπως μπορεί κανείς να βοηθήσει???
dimitris_gr
New member
Απάντηση: Re: AZBox Elite/Premium, part II
Στο μενού υπάρχουν τα ποιο κάτω..
1 Diseqc 1.0 lnb1-2-3-4
2 Diseqc mini lnb1-2
3 Diseqc 1,1 lnb1-16
4 SW21 DISH1-2
5 SW42 DISH1-2
6 SW44 DISH1
7 SW64 DISH1A-1B-2A-2B-3A-3B
8 Και τέλος Combination με διάφορες εντολές.
Η δεύτερη επιλογή,(mini lnb 1-2) μπορεί να δει diseqc 2.0 αλλά μόνο 2 θέσεων.Η λύση είναι να αλλάξεις το diseqc και να βάλεις ενα 1.0 και θα επιλέξεις την πρώτη ρύθμιση και θα είσαι οκ. :smile:
Στο μενού υπάρχουν τα ποιο κάτω..
1 Diseqc 1.0 lnb1-2-3-4
2 Diseqc mini lnb1-2
3 Diseqc 1,1 lnb1-16
4 SW21 DISH1-2
5 SW42 DISH1-2
6 SW44 DISH1
7 SW64 DISH1A-1B-2A-2B-3A-3B
8 Και τέλος Combination με διάφορες εντολές.
Η δεύτερη επιλογή,(mini lnb 1-2) μπορεί να δει diseqc 2.0 αλλά μόνο 2 θέσεων.Η λύση είναι να αλλάξεις το diseqc και να βάλεις ενα 1.0 και θα επιλέξεις την πρώτη ρύθμιση και θα είσαι οκ. :smile:
Last edited:
σευχαριστω που απαντησες φιλε dimitris_gr αλλα θα παρακαλουσα για μια μεταφραση στα ελληνικα του ποστ του φιλου nakata αν καποιος απο την παρεα εχει την καλοσυνη.απο bonitsa ευχαριστω
angelheart
Senior Member
Re: Απάντηση: AZBox Elite/Premium, part II
Δημήτρη το βλέπω καθυστερημένα. Λοιπόν
τρέχεις τον http://www.fs-driver.org/download/Ext2IFS_1_11a.exe
και δίσκοι σε ext2/ext3 εμφανίζονται κανονικά στο μενού του My Computer. Δουλεύει κανονικά το γράψε και το σβήσε από και πρός. Κάντο και θα με θυμηθείς.
Ελπίζω να βοήθησα
Σίμος
Δημήτρη το βλέπω καθυστερημένα. Λοιπόν
τρέχεις τον http://www.fs-driver.org/download/Ext2IFS_1_11a.exe
και δίσκοι σε ext2/ext3 εμφανίζονται κανονικά στο μενού του My Computer. Δουλεύει κανονικά το γράψε και το σβήσε από και πρός. Κάντο και θα με θυμηθείς.
Ελπίζω να βοήθησα
Σίμος
Last edited:
FIRM KGD 4980 Take Control
Well seeing that people longed for a new version of KGD end we have developed and added new features but still needs to be done and improve it and as always as a hobby in our spare time we are just working.
In this version we have focused on the overall speed of the system both in menus, cams and media. And also in our great friend MORSE EPG is an EPG currado spectacular show in the thread that you have more information below details.
I will spell out in broad terms the changes made:
- Fix crond now works correctly from the Panel.
- Fixed formatting DOM now supports firmware changes, the main advantage is that it leaves remains of the firmware and performs the load perfectly, but more importantly is that doing a format of all settings mantiende area network OpenXCAS (cams) , PanelKGD, TelnetKGD ..., ie when getting a new firmware after formatting only have to put a list of compatible channels and set the language and resolution, and the rest will be everything you had before.
The following process is the selection in the DOM formatting PanelKGD subsequently read the instructions and click OK without doing anything else is passed to standby simplente deco just click once on the POWER button and you're in that mode, you will see a series of messages on the display to indicate what you are doing when you finish and Reboot and You will be able to put the new PATCH.BIN.
VERY IMPORTANT: The firmware currently one of the KGD tengais You will be able to use the DOM formatting option to test, you only have to download the extras PanelKGD in the Miscellaneous option and the update_format_DOM reinciais and then you will make the formatting from the panelKGD.
- Version 0.2 TCK
- Added TV and cams
- Changes in general performance
- Added more multimedia priority
- New option in config now tck improved browser
This version of the TCK has been made several tests with different media files on all MKV file for example in times of high bibrate our azbox is placed in a 98-99% CPU usage so that when it reaches 100% power cuts or freezes, we have managed to reduce by 90% so we can say that only very punctual cuts occur in the subject believe that our memory is not so bad azbox the main problem you have is the data BUS and CPU Opensat these are the Hardware Acceleration for improved overclocking which is a pure and simple, we recommend that those who use it is AT YOUR OWN RISK and we recommend that all overclocking as well azbox cools putting some extra fan.
- On the DMA in the DOM you get 30% more speed through the new command implemented.
- Removed the option premium plus fan now because of azbox menu itself can be done perfectly.
- Added a new command that we'll talk called sdparm that will optimize the HDD by USB so its on and off for lack of time we could not add more options but we leave it for you can do tests with it.
- In the Backup configuration panelKGD in being added all types of existing channel lists cable and satellite tdt.
- Removed the menu KGD panel format Formatting FAT32 and FAT has been the standard because it gave some USB problems, such as those used to put the patch.bin in the upgrade process.
- Added Patches Spanish.
- New Skin Mpiero minimalist reduces memory consumption by 70% the same here the skin is reduced to a minimum by removing graphics imnecesarios this makes the navigation of the data is very very fast and smooth, we have taken this step because we think the speed is better than aesthetics.
- Youtube OK, with the active option reproduction in TCK 0.2 is done much quicker than before.
- Added an option to install from the FTP Skins are downloaded from the same panelKGD below deco sets in standby the only change made by the skin and ultimately can return to the menu and changed the (still not exist in the new FTP skins but will be added on) will keep you informed.
- In the PanelKGD configurations can enable / disable your DaemonEGP this is the charge of carrying the EPG every day at 5 am and put two days of EPG is a default setup can modifcar in another post this all author Morser better explained.
- Added in Scripps PanelKGD manual loading of the EPG makes it instead of waiting to load the EPG at the time stipulated or default there do be patient when the process takes between 3-4 minutes.
It is an experimental firmware we are not the responsibility of the use to which it may give or cause damage, does not contain nails or Nigun emulation type, remember that the viewing platform for payment without a corresponding subscriber is a crime punishable by LAW .
And last and most importate thank all who have collaborated and developed the image, mainly Morser has been the maker of the EPG, the admin of azboxhd, Linares, Fundidum, Yersi, Mpiero, Macmanolo and hope not to forget anyone more. We also want to thank the web provides us with the EPG (hxxp://www.rytec.be
http://www.megaupload.com/?d=HZBL9QKM
Well seeing that people longed for a new version of KGD end we have developed and added new features but still needs to be done and improve it and as always as a hobby in our spare time we are just working.
In this version we have focused on the overall speed of the system both in menus, cams and media. And also in our great friend MORSE EPG is an EPG currado spectacular show in the thread that you have more information below details.
I will spell out in broad terms the changes made:
- Fix crond now works correctly from the Panel.
- Fixed formatting DOM now supports firmware changes, the main advantage is that it leaves remains of the firmware and performs the load perfectly, but more importantly is that doing a format of all settings mantiende area network OpenXCAS (cams) , PanelKGD, TelnetKGD ..., ie when getting a new firmware after formatting only have to put a list of compatible channels and set the language and resolution, and the rest will be everything you had before.
The following process is the selection in the DOM formatting PanelKGD subsequently read the instructions and click OK without doing anything else is passed to standby simplente deco just click once on the POWER button and you're in that mode, you will see a series of messages on the display to indicate what you are doing when you finish and Reboot and You will be able to put the new PATCH.BIN.
VERY IMPORTANT: The firmware currently one of the KGD tengais You will be able to use the DOM formatting option to test, you only have to download the extras PanelKGD in the Miscellaneous option and the update_format_DOM reinciais and then you will make the formatting from the panelKGD.
- Version 0.2 TCK
- Added TV and cams
- Changes in general performance
- Added more multimedia priority
- New option in config now tck improved browser
This version of the TCK has been made several tests with different media files on all MKV file for example in times of high bibrate our azbox is placed in a 98-99% CPU usage so that when it reaches 100% power cuts or freezes, we have managed to reduce by 90% so we can say that only very punctual cuts occur in the subject believe that our memory is not so bad azbox the main problem you have is the data BUS and CPU Opensat these are the Hardware Acceleration for improved overclocking which is a pure and simple, we recommend that those who use it is AT YOUR OWN RISK and we recommend that all overclocking as well azbox cools putting some extra fan.
- On the DMA in the DOM you get 30% more speed through the new command implemented.
- Removed the option premium plus fan now because of azbox menu itself can be done perfectly.
- Added a new command that we'll talk called sdparm that will optimize the HDD by USB so its on and off for lack of time we could not add more options but we leave it for you can do tests with it.
- In the Backup configuration panelKGD in being added all types of existing channel lists cable and satellite tdt.
- Removed the menu KGD panel format Formatting FAT32 and FAT has been the standard because it gave some USB problems, such as those used to put the patch.bin in the upgrade process.
- Added Patches Spanish.
- New Skin Mpiero minimalist reduces memory consumption by 70% the same here the skin is reduced to a minimum by removing graphics imnecesarios this makes the navigation of the data is very very fast and smooth, we have taken this step because we think the speed is better than aesthetics.
- Youtube OK, with the active option reproduction in TCK 0.2 is done much quicker than before.
- Added an option to install from the FTP Skins are downloaded from the same panelKGD below deco sets in standby the only change made by the skin and ultimately can return to the menu and changed the (still not exist in the new FTP skins but will be added on) will keep you informed.
- In the PanelKGD configurations can enable / disable your DaemonEGP this is the charge of carrying the EPG every day at 5 am and put two days of EPG is a default setup can modifcar in another post this all author Morser better explained.
- Added in Scripps PanelKGD manual loading of the EPG makes it instead of waiting to load the EPG at the time stipulated or default there do be patient when the process takes between 3-4 minutes.
It is an experimental firmware we are not the responsibility of the use to which it may give or cause damage, does not contain nails or Nigun emulation type, remember that the viewing platform for payment without a corresponding subscriber is a crime punishable by LAW .
And last and most importate thank all who have collaborated and developed the image, mainly Morser has been the maker of the EPG, the admin of azboxhd, Linares, Fundidum, Yersi, Mpiero, Macmanolo and hope not to forget anyone more. We also want to thank the web provides us with the EPG (hxxp://www.rytec.be
http://www.megaupload.com/?d=HZBL9QKM
GEORGE M.
Supreme Member
ισως η ερωτηση να εχει ξαναγινει και συγνωμη αν γινομαι κουραστικος...
τι διαφορα εχει ο Premium απο τον Plus;;; ευχαριστω!
τι διαφορα εχει ο Premium απο τον Plus;;; ευχαριστω!
φιλε bonitsa κοιτα τα pm σου εκει ειναι το τηλεφωνο μου! παρεμε αν δεν εχεις βγαλει ακρη με το ε2
newlynx
AVClub Enthusiast
- 28 August 2006
- 1,207
Re: Απάντηση: AZBox Elite/Premium, part II
Θέαση από το ένα tuner και εγγραφή από το άλλο.
Θέαση από το ένα tuner και εγγραφή από το άλλο.